How to replace the lower ball joint on Cadillac Escalade?

In order to replace the lower Ball Joint first raise the vehicle, respecting the vehicle lifting and the rear wheel steering lifting and jacking notice for safety. Erase a tire and wheel then take out the bolt and nut that fastens bracket to reveal the pinch bolt. Next, pull off the snap ring from the Ball Joint stud, and the bolts that secure the lower Ball Joint to the Steering Knuckle. Remove that pinch bolt that secures the lower ball and remove the lower Ball Joint form the vehicle. For installation, align the new lower Ball Joint and then bolt it to the steering process with the component bolts and tighten them to 110 n.m (81 lb ft). Snug the lower Ball Joint pinch bolt and tighten it to 230 n.m (169 lb ft). Then, put on the snapring upon the lower Ball Joint, and the bolt and nut securing the bracket to the axle, then tighten to 25 n.m (18 lb ft). Lastly, do a four-wheel alignment and install the rire and wheel again and bring down the vehicle.

OEM Cadillac Escalade Ball Joint

Control Arm Joint

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Ball Joints found

View related parts
Cadillac Escalade Lower Ball Joint, Front
Part Number: 12475478
$103.35 MSRP: $161.18
You Save: $57.83 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stud Kit, Front Lower Control Arm Ball; Suspension Ball Joint; Ball Joint; Stud Kit, Steering Knuckle Lower Control Arm Pivot
- Position: Front Lower
- Replaces: 12472819
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2006 Cadillac Escalade | Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade Lower Ball Joint, Front
Part Number: 19256481
$40.33 MSRP: $66.41
You Save: $26.08 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stud Kit, Front Lower Control Arm Ball; Suspension Ball Joint; Ball Joint; Stud Kit, Steering Knuckle Lower Control Arm Pivot
- Position: Front Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 Cadillac Escalade | Base, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Lower Ball Joint, Front
Part Number: 19209396
$67.94 MSRP: $116.69
You Save: $48.75 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stud Kit, Front Lower Control Arm Ball; Suspension Ball Joint; Ball Joint; Stud Kit, Steering Knuckle Lower Control Arm Pivot
- Position: Front Lower
- Replaces: 15922557
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2016 Cadillac Escalade | Base, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Lower Ball Joint, Front
Part Number: 19416896
$88.06 MSRP: $145.05
You Save: $56.99 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stud Kit, Front Lower Control Arm Ball; Ball Joint; Stud Kit, Steering Knuckle Lower Control Arm Pivot; Stud Kit, Front Wheel Lower Control Arm
- Position: Front Lower
- Replaces: 12480852, 15659724
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2000 Cadillac Escalade | Base | 8 Cyl 5.7 L GAS
View related parts
Cadillac Escalade Upper Ball Joint
Part Number: 19146901
Product Specifications
- Other Name: Hose, Power Steering Gear Inlet; Ball Joint; Upper Ball Joints; Stud Kit, Steering Knuckle Upper Control Arm
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2000 Cadillac Escalade | Base | 8 Cyl 5.7 L GAS
View related parts
Cadillac Escalade Lower Ball Joint, Front
Part Number: 19416898
Product Specifications
- Other Name: Stud Kit, Front Lower Control Arm Ball; Suspension Ball Joint; Ball Joint; Stud Kit, Steering Knuckle Lower Control Arm Pivot
- Position: Front Lower
- Replaces: 12380415, 12383410
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2000 Cadillac Escalade | Base | 8 Cyl 5.7 L GAS
View related parts
Cadillac Escalade Upper Ball Joint, Front
Part Number: 19416903
Product Specifications
- Other Name: Stud Kit, Front Upper Control Arm Ball; Ball Joint; Upper Ball Joints; Stud Kit, Steering Knuckle Upper Control Arm
- Position: Front Upper
- Replaces: 15969282, 15659447
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2000 Cadillac Escalade | Base | 8 Cyl 5.7 L GAS

Cadillac Escalade Ball Joint

Our website offers an extensive catalog of genuine Cadillac Escalade Ball Joint at unbeatable prices. Every OEM Cadillac Escalade Ball Joint comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Cadillac Escalade Ball Joint Parts Questions & Experts Answers

Lower Ball Joint, Front
12475478
Q: How to replace the lower ball joint on Cadillac Escalade?
A: In order to replace the lower Ball Joint first raise the vehicle, respecting the vehicle lifting and the rear wheel steering lifting and jacking notice for safety. Erase a tire and wheel then take out the bolt and nut that fastens bracket to reveal the pinch bolt. Next, pull off the snap ring from the Ball Joint stud, and the bolts that secure the lower Ball Joint to the Steering Knuckle. Remove that pinch bolt that secures the lower ball and remove the lower Ball Joint form the vehicle. For installation, align the new lower Ball Joint and then bolt it to the steering process with the component bolts and tighten them to 110 n.m (81 lb ft). Snug the lower Ball Joint pinch bolt and tighten it to 230 n.m (169 lb ft). Then, put on the snapring upon the lower Ball Joint, and the bolt and nut securing the bracket to the axle, then tighten to 25 n.m (18 lb ft). Lastly, do a four-wheel alignment and install the rire and wheel again and bring down the vehicle.