How to replace the Front Drive Axle Inner Wheel Seal and Inner Shaft Bearing on Cadillac Escalade ESV?

The replacement of front drive axle inner shaft seal and inner shaft bearing requires the following set of tools: universal driver handle (J 8092), slide hammer (J 2619-01), bushing and bearing remover (J 29369-1), bushing and bearing remover (2-3 inch) (J 29369-2), axle tube bearing installer (J 36609), and axle seal installer (J 45225). First drain the differential carrier assembly while the vehicle remains in the raised position. Remove the right side seal or bearing by extracting the inner Axle Shaft with housing from the differential carrier case assembly then removing the Clutch Fork components until you reach the inner Axle Shaft in the inner Axle Shaft housing. Mount the inner Axle Shaft housing inside a vise while using either j 29369-1 or j 29369-2 bushing and bearing remover devices after the inner Axle Shaft seal or bearing. The bushing and bearing remover joins the slide hammer (J 2619-01) to extract the inner Axle Shaft seal or bearing. Installation of right side bearing requires the axle tube bearing installer (J 36609) with universal driver handle (J 8092) before installing new Axle Shaft seal using axle seal installer (J 45225) and universal driver handle (J 8092). Insert the inner Axle Shaft into position slowly with a soft-faced mallet then put all inner shaft housing components back together. The same installation process should be performed for the left side bearing and seal using the same tools after both components are removed. At the end of the process install the correct fluid within the differential carrier assembly then lower the vehicle.

How to replace the rear axle shaft wheel seal or bearing on the 8.6 Inch Axle W/JL4 on Cadillac Escalade ESV?

The replacement procedure for rear Axle Shaft seal or bearing on the 8.6 inch axle w/jl4 begins with vehicle elevation and moving up to tire and wheel removal then proceeding to the rear axle housing cover and Axle Shaft extraction. You can use a suitable seal remover to remove the Axle Shaft seal while Axle Shaft seals and bearings combined removal requires the tone wheel or bearing remover (J 45857) and the slide hammer (J 2619-01). Install the Axle Shaft bearing through the bearing installer (J 23690) with universal driver handle (J 8092) until the tool hits the tube. The installation process utilizes the axle pinion oil seal installer (J 21128) to drive the seal inside the bore until it reaches tube level. Before closing the vehicle lastly reinsert both the Axle Shaft and rear axle housing cover together with the tire and wheel assembly followed by completing the rear axle filling process and finally lowering the vehicle.

OEM Cadillac Escalade ESV Wheel Seal

Wheel Axle Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Wheel Seals found

View related parts
Cadillac Escalade ESV Output Shaft Seal, Front Inner Part Number: 22761722
$22.43 MSRP: $38.51
You Save: $16.08 (42%)
ADD TO CART
Product Specifications
- Other Name: Seal Assembly-Front Drive Axle Inner Shaft; Axle Seal; Inner Seal; Outer Seal; Seal, Front Axle
- Position: Front Inner
- Replaces: 12471591, 12471682, 15801507, 12479012, 26059623
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2020, 2003-2006 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium, Premium Luxury | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Output Shaft Seal, Front Part Number: 19169124
$11.16 MSRP: $18.41
You Save: $7.25 (40%)
ADD TO CART
Product Specifications
- Other Name: Seal, Front Wheel Drive Shaft; Axle Seal; Seal, Front Axle
- Position: Front
- Replaces: 12471683, 12471592, 12479155, 26059624
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2005 Cadillac Escalade ESV | Base | 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade ESV Oil Seal, Rear Part Number: 19180849
$16.73 MSRP: $31.42
You Save: $14.69 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Seal, Rear Axle Shaft; Wheel Seal; Axle Seal; Bearing Seal; Axle Seals; Wheel Bearing Oil Seal; Rear Axle Shaft Seal.
- Position: Rear
- Replaces: 15522062, 14047298, 26057167
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 Cadillac Escalade ESV | Base | 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade ESV Axle Seal, Rear Part Number: 15823962
$29.22 MSRP: $54.88
You Save: $25.66 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Seal, Rear Axle Shaft; Wheel Seal; Hub Seal; Axle Seals; Hub Seals; Seal, Rear Wheel Bearing Oil
- Position: Rear
- Replaces: 15007008, 26061024
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 Cadillac Escalade ESV | Base | 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade ESV Oil Seal, Rear Part Number: 12471686
$12.28 MSRP: $22.22
You Save: $9.94 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Rear Axle Shaft; Wheel Seal; Axle Seal; Hub Seal; Bearing Seal; Axle Seals; Axle Bearing Seal; Seal, Rear Wheel Bearing Oil
- Position: Rear
- Replaces: 15522060, 26037309
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2020 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium, Premium Luxury | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Axle Seal Part Number: 84428310
$10.27 MSRP: $19.28
You Save: $9.01 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal-Front Wheel Drive Shaft; Output Shaft Seal; Axle Seals; Seal, Rear Wheel Bearing Oil; Seal, Front Axle
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Cadillac Escalade ESV | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum, V | 6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Rear Hub Seal Part Number: 84273180
$4.94 MSRP: $8.82
You Save: $3.88 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal-Rear Wheel Hub (O Ring); Wheel Hub Repair Kit; Wheel Seal; Axle Seal; Hub Assembly Seal; Seal, Rear Wheel Bearing Oil
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Cadillac Escalade ESV | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum, V | 6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Front Hub Seal Part Number: 23390381
$4.81 MSRP: $9.04
You Save: $4.23 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Front Wheel Bearing; Wheel Hub Repair Kit; Wheel Seal; Axle Seal; Knuckle O-Ring; Seal, Brakes
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Cadillac Escalade ESV | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum, V | 6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Axle Housing O-Ring, Front Part Number: 23371177
$2.50 MSRP: $4.46
You Save: $1.96 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Front Wheel Drive Axle Shaft; O-Ring; Seal, Front Axle
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Cadillac Escalade ESV | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum, V | 6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Axle Seal, Rear Driver Side Part Number: 84649194
$8.83 MSRP: $15.76
You Save: $6.93 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Rear Axle Shaft Bearing Or Hub; Wheel Seal; Output Shaft Seal; Axle Seals; Seal, Rear Wheel Bearing Oil
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Cadillac Escalade ESV | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum, V | 6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Axle Seal, Rear Passenger Side Part Number: 84649193
$8.83 MSRP: $15.76
You Save: $6.93 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Rear Axle Shaft Bearing Or Hub; Wheel Seal; Output Shaft Seal; Axle Seals; Seal, Rear Wheel Bearing Oil
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Cadillac Escalade ESV | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum, V | 6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Output Shaft Seal, Front Part Number: 84428321
$2.79 MSRP: $5.24
You Save: $2.45 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Front Wheel Drive Axle Shaft; Axle Seal; Axle Housing O-Ring; O-Ring; Seal, Front Axle
- Position: Front
- Replaced by: 84983738
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Cadillac Escalade ESV | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum, V | 6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L GAS

Cadillac Escalade ESV Wheel Seal

Want to cut long-term maintenance and repair costs? Choose OEM Wheel Seal. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Cadillac Escalade ESV parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Cadillac Escalade ESV Wheel Seal includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Cadillac Escalade ESV Wheel Seal Parts and Q&A

Oil Seal, Rear
12471686
Q: How to replace the Front Drive Axle Inner Wheel Seal and Inner Shaft Bearing on Cadillac Escalade ESV?
A:
The replacement of front drive axle inner shaft seal and inner shaft bearing requires the following set of tools: universal driver handle (J 8092), slide hammer (J 2619-01), bushing and bearing remover (J 29369-1), bushing and bearing remover (2-3 inch) (J 29369-2), axle tube bearing installer (J 36609), and axle seal installer (J 45225). First drain the differential carrier assembly while the vehicle remains in the raised position. Remove the right side seal or bearing by extracting the inner Axle Shaft with housing from the differential carrier case assembly then removing the Clutch Fork components until you reach the inner Axle Shaft in the inner Axle Shaft housing. Mount the inner Axle Shaft housing inside a vise while using either j 29369-1 or j 29369-2 bushing and bearing remover devices after the inner Axle Shaft seal or bearing. The bushing and bearing remover joins the slide hammer (J 2619-01) to extract the inner Axle Shaft seal or bearing. Installation of right side bearing requires the axle tube bearing installer (J 36609) with universal driver handle (J 8092) before installing new Axle Shaft seal using axle seal installer (J 45225) and universal driver handle (J 8092). Insert the inner Axle Shaft into position slowly with a soft-faced mallet then put all inner shaft housing components back together. The same installation process should be performed for the left side bearing and seal using the same tools after both components are removed. At the end of the process install the correct fluid within the differential carrier assembly then lower the vehicle.
Oil Seal, Rear
19180849
Q: How to replace the rear axle shaft wheel seal or bearing on the 8.6 Inch Axle W/JL4 on Cadillac Escalade ESV?
A:
The replacement procedure for rear Axle Shaft seal or bearing on the 8.6 inch axle w/jl4 begins with vehicle elevation and moving up to tire and wheel removal then proceeding to the rear axle housing cover and Axle Shaft extraction. You can use a suitable seal remover to remove the Axle Shaft seal while Axle Shaft seals and bearings combined removal requires the tone wheel or bearing remover (J 45857) and the slide hammer (J 2619-01). Install the Axle Shaft bearing through the bearing installer (J 23690) with universal driver handle (J 8092) until the tool hits the tube. The installation process utilizes the axle pinion oil seal installer (J 21128) to drive the seal inside the bore until it reaches tube level. Before closing the vehicle lastly reinsert both the Axle Shaft and rear axle housing cover together with the tire and wheel assembly followed by completing the rear axle filling process and finally lowering the vehicle.