Other Name: Switch Assembly, Turn Signal & Headlamp Dimmer; Multi Purpose Switch; Multifunction Switch; Signal Switch; Switch, Turn Signal Lamp; Switch, Headlamp Dimmer
Replaces: 26083577
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2001-2004 Cadillac Seville | SLS, STS | 8 Cyl 4.6 L GAS
Other Name: Switch Assembly, Turn Signal; Hazard Flasher Switch; Multi Purpose Switch; Hazard Switch; Signal Switch; Turn Signal & Hazard Switch; Switch, Turn Signal Lamp
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1984-1985 Cadillac Seville | Base, Elegante | 8 Cyl 4.1 L GAS, 8 Cyl 5.7 L DIESEL
Other Name: Lever, Turn Signal Control; Turn/Wiper Lever; Lever
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1996-1997 Cadillac Seville | SLS, STS | 8 Cyl 4.6 L GAS
Cadillac Seville Turn Signal Switch
Our website offers an extensive catalog of genuine Cadillac Seville Turn Signal Switch at unbeatable prices. Every OEM Cadillac Seville Turn Signal Switch comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Cadillac Seville Turn Signal Switch Parts Questions & Experts Answers
Q: How to replace the multifunction turn signal switch (LHD) on Cadillac Seville?
A: Before taking out the multifunction Turn Signal Switch (LHD), you should deactivate the sir system and take off the steering column trim covers. Then, take off the steering column wire harness tie straps and remove the electrical connectors from the steering column control module, making sure you remember the wiring harness path for reassembling. Remove the lower steering column wire harness shield and take out the wire harness from the steering column. Unplug the three electrical connectors (1,2,3) from the multifunction switch, and then take out the retaining screws before you remove the switch. For the installation, set the switch's electrical contact in place on the turn signal cancel cam assembly, then install the multifunction switch and attach it with the retaining screws tightened to a final torque of 7 nm (62 inch lbs.). Connect the multifunction switch wirings (1,2,3), return the wire harness to the wire harness shield, plug in the control module connectors, and put the tie straps on the steering column wire harness. Afterward, put the steering column trim covers in place and turn on the sir system.