Other Name: Solenoid, Fuel Tank Evaporator/Purge Control; Vapor Canister Purge and Vent Solenoids; Purge Valve.; Purge Solenoid
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2004-2005 Cadillac SRX | Base | 6 Cyl 3.6 L GAS
Cadillac SRX Canister Purge Valves
Our website offers an extensive catalog of genuine Cadillac SRX Canister Purge Valves at unbeatable prices. Every OEM Cadillac SRX Canister Purge Valves comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Cadillac SRX Canister Purge Valves Parts Questions & Experts Answers
Q: How to replace the canister purge valves on Cadillac SRX?
A: To replace evaporative emission canister purge solenoid valve, loosen system pressure by unscrewing fuel cap, then withdraw fuel injector sight shield. Disconnect the evap canister purge valve electrical connector and the evap purge pipe from the evap canister purge valve. Take out the retaining bolt, and remove the evap canister purge valve from the water housing. In the process of installing the new valve ensure that you use the new o-ring that is lubricated using the clean engine oil. Mount the evap canister purge valve over the water housing and clamp it with a retaining bolt that is torqued to 12 n.m (106 lb in). Reconnect the evap purge pipe and the electrical connector and, finally, reinstalled the fuel injector sight shield.