How to service and repair the ignition coil on Chevrolet Corvette?

To service & repair the Ignition Coil, initiate by disconecting the cable off the negative battery observing the battery disconnects precautions. Next, unbolt the fuel rail cover and disconnect from the Ignition Coil harness connector and from the spark plug wire and disconnect at the Ignition Coil. Loosen the mounting bolts of the Ignition Coil and remove the Ignition Coil. During installation, return the Ignition Coil to its position and tighten it on the mounting bolts to 12 n.m (106 lb in). Reconnect the spark plug wire to the terminal of the Ignition Coil, and connect the Ignition Coil harness connector, and fasten the harness bolt to 12 n.m (106 lb in). Finally, the fuel rail cover should be reinstalled, the negative cable can be reconnected, and the transmitters could be programmed.

How to replace the ignition coil on Chevrolet Corvette?

The replacement process for an Ignition Coil begins with disconnecting the negative Battery Cable. First remove the left-side engine sight shield before disconnecting both the Ignition Coil harness connector and the spark plug wire that attaches to the Ignition Coil. You should remove the Ignition Coil mounting bolts while pulling out the Ignition Coil. Once installed replace the Ignition Coil into its proper position using mounting bolts, tighten these bolts to 12 n.m (106 lb in). Tighten the spark plug wire and Ignition Coil harness connector while making sure to secure the harness bolt to 12 n.m (106 lb in). To finish the job reinstall the engine sight shield while reconnecting the negative Battery Cable and programming the transmitters according to need.

OEM Chevrolet Corvette Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Ignition Coils found

View related parts
Chevrolet Corvette Ignition Coil Part Number: 12699382
$79.39 MSRP: $163.16
You Save: $83.77 (52%)
ADD TO CART
Product Specifications
- Other Name: Coil Assembly-Ignition; Ignition Module; Coil; Coil, Ignition Coil
- Replaced by: 12739916
- Replaces: 12573190
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2013 Chevrolet Corvette | 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Corvette Ignition Coil Part Number: 12611424
$79.39 MSRP: $163.16
You Save: $83.77 (52%)
ADD TO CART
Product Specifications
- Other Name: Coil, Ignition; Direct Ignition Coil; Coil; Coil, Ignition Coil
- Replaced by: 12739916
- Replaces: 12570616
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2013 Chevrolet Corvette | 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Corvette Ignition Coil Part Number: 19418995
$41.68 MSRP: $114.58
You Save: $72.90 (64%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil, Ignition Coil; Coil; Coil Kit, Ignition Coil
- Replaces: 01115468, 12498334, 01115315, 1115315, 1115468
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1993 Chevrolet Corvette | 40th Anniversary Edition, Base | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Corvette Ignition Coil Part Number: 10497133
$77.62 MSRP: $138.60
You Save: $60.98 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil Assembly, Ignition
- Replaced by: 19435464
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1985 Chevrolet Corvette | Base | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Corvette Ignition Coil Part Number: 19421259
$67.47 MSRP: $138.65
You Save: $71.18 (52%)
ADD TO CART
Product Specifications
- Other Name: Coil Assembly, Ignition; Coil, Ignition Coil
- Replaces: 12556450, 12558948
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2004 Chevrolet Corvette | 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Corvette Ignition Coil Part Number: 12713668
$28.52 MSRP: $53.56
You Save: $25.04 (47%)
ADD TO CART
Product Specifications
- Other Name: Coil Assembly-Ignition; Coil, Ignition Coil
- Replaced by: 12723610
- Replaces: 12619161, 12669351
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2024 Chevrolet Corvette | E-Ray, Grand Sport, Stingray, Z06, ZR1 | 8 Cyl 6.2 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Ignition Coil Part Number: 19418996
$70.98 MSRP: $145.86
You Save: $74.88 (52%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil Assembly, Ignition; Coil, Ignition Coil
- Replaces: 10489421, 19207138
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996 Chevrolet Corvette | Base, Collector's Edition, Grand Sport | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Corvette Ignition Coil Part Number: 12728713
$46.84 MSRP: $83.64
You Save: $36.80 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil Assembly-Ignition; Coil, Ignition Coil
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023-2024 Chevrolet Corvette | Z06 | 8 Cyl 5.5 L GAS
View related parts
Chevrolet Corvette Ignition Coil Part Number: 12708496
$78.58 MSRP: $161.49
You Save: $82.91 (52%)
ADD TO CART
Product Specifications
- Other Name: Coil Assembly-Ignition; Coil, Ignition Coil
- Replaced by: 12726023
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2019 Chevrolet Corvette | Grand Sport, Stingray, Z06, ZR1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Ignition Coil Part Number: 12498336
$73.85 MSRP: $151.76
You Save: $77.91 (52%)
ADD TO CART
Product Specifications
- Other Name: Coil, Ignition Coil; Coil
- Replaces: 01985474, 1985474
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1991 Chevrolet Corvette | 35th Anniversary Edition, Base, Indianapolis 500 Pace Car, ZR-1 | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Corvette Ignition Coil Part Number: 10467067
$52.54 MSRP: $98.66
You Save: $46.12 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil, Ignition; Coil, Ignition Coil
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1995 Chevrolet Corvette | ZR-1 | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Corvette Ignition Coil Part Number: 10477208
$58.18 MSRP: $103.91
You Save: $45.73 (45%)
Product Specifications
- Other Name: Coil Assembly, Ignition; Coil, Ignition Coil
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1995 Chevrolet Corvette | Base, Indianapolis 500 Pace Car | 8 Cyl 5.7 L GAS

Chevrolet Corvette Ignition Coil

Want to cut long-term maintenance and repair costs? Choose OEM Ignition Coil. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Corvette parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Corvette Ignition Coil includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Ignition Coil is used in Chevrolet Corvette cars specifically for ignition where low voltage coming from the alternator is stepped up to provide ignition of fuel in the cylinders. It plays a crucial role of producing sparks and need to be effective for the proper combustion to occur in the engine. This gets rid of the common problem on current generation Corvette's programmable ignition system to get the optimal performance. Incorporated in any Corvette, no matter old or new, are the ignition coils; as for new Corvette models, the coils for each cylinder are separate. Defective ignition coils cause misfiring which has a negative impact on the performance of the car, show their significance in the performance of the car.

Chevrolet Corvette Ignition Coil Parts and Q&A

Ignition Coil
19421259
Q: How to service and repair the ignition coil on Chevrolet Corvette?
A:
To service & repair the Ignition Coil, initiate by disconecting the cable off the negative battery observing the battery disconnects precautions. Next, unbolt the fuel rail cover and disconnect from the Ignition Coil harness connector and from the spark plug wire and disconnect at the Ignition Coil. Loosen the mounting bolts of the Ignition Coil and remove the Ignition Coil. During installation, return the Ignition Coil to its position and tighten it on the mounting bolts to 12 n.m (106 lb in). Reconnect the spark plug wire to the terminal of the Ignition Coil, and connect the Ignition Coil harness connector, and fasten the harness bolt to 12 n.m (106 lb in). Finally, the fuel rail cover should be reinstalled, the negative cable can be reconnected, and the transmitters could be programmed.
Ignition Coil
12611424
Q: How to replace the ignition coil on Chevrolet Corvette?
A:
The replacement process for an Ignition Coil begins with disconnecting the negative Battery Cable. First remove the left-side engine sight shield before disconnecting both the Ignition Coil harness connector and the spark plug wire that attaches to the Ignition Coil. You should remove the Ignition Coil mounting bolts while pulling out the Ignition Coil. Once installed replace the Ignition Coil into its proper position using mounting bolts, tighten these bolts to 12 n.m (106 lb in). Tighten the spark plug wire and Ignition Coil harness connector while making sure to secure the harness bolt to 12 n.m (106 lb in). To finish the job reinstall the engine sight shield while reconnecting the negative Battery Cable and programming the transmitters according to need.