How to replace the lower intake manifold on Chevrolet Equinox?

Draining the cooling system should be your first step followed by removing the upper Intake Manifold and heater inlet pipe and separating the radiator inlet hose from the Thermostat Housing. After filling the cooling system owners should reinstall the Fuel Rail assembly followed by installing the radiator inlet hose to the Thermostat Housing and the heater inlet pipe then the upper Intake Manifold. Start by removing the Thermostat and housing and continue with the rocker arms and push rods and finally the lower Intake Manifold gaskets if a new lower Intake Manifold is installed. Clean all gasket mating surfaces by using gm p/n 12346139 (Canadian P/N 10953463) or an equivalent cleaning agent and avoid placing rtv sealer on the engine block before installing manifold gaskets. Install first the lower Intake Manifold gaskets and then the rocker arms, push rods, lower Intake Manifold seals. Install the lower Intake Manifold following an rtv sealer application with gm p/n 12346141 (Canadian P/N 10953433). New fasteners provide optimal gasket performance when fitted with thread-locking patches or when old fasteners receive a thread-locking chemical application. All lower Intake Manifold bolts require gm p/n 1234382 (Canadian P/N 10953489) or equivalent for cleaning up and clearing off foreign materials. Proper torque distribution requires complete center bolt torque before moving to diagonal bolts with specific torque settings attainable through crows foot type tools targeting locations and . On the first pass, tighten the lower Intake Manifold bolts (1, 2, 3, 4) in sequence to 7 nm (62 inch lbs.), then on the final pass, tighten them to 13 nm (115 inch lbs.)after initial light tightening (5, 6, 7, 8), torque the bolts in a specified order to 25 nm (18 ft. Lbs.). The final procedure requires re-mounting the Fuel Rail assembly while attaching the radiator inlet hose to the Thermostat Housing then installing the heater inlet pipe and upper Intake Manifold before completing the cooling system fill-up.

OEM Chevrolet Equinox Intake Manifold

Engine Intake Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Intake Manifolds found

View related parts
Chevrolet Equinox Intake Manifold
Part Number: 12637620
$104.78 MSRP: $178.37
You Save: $73.59 (42%)
ADD TO CART
Product Specifications
- Other Name: Manifold, Engine Fuel Intake Manifold
- Replaces: 12637193, 12632227
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2017 Chevrolet Equinox | L, LS, LT, LTZ, Premier | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Equinox Intake Manifold
Part Number: 12699182
$334.42 MSRP: $526.17
You Save: $191.75 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold, Engine Fuel Intake Manifold; Intake Plenum; Manifold
- Replaces: 12648915, 12635243
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013-2017 Chevrolet Equinox | LT, LTZ, Premier | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Equinox Intake Manifold
Part Number: 12600281
$240.67 MSRP: $727.26
You Save: $486.59 (67%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold, Engine Fuel Intake Manifold
- Position: Upper
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006 Chevrolet Equinox | LS, LT | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Equinox Intake Manifold
Part Number: 55505747
$182.23 MSRP: $295.70
You Save: $113.47 (39%)
ADD TO CART
Product Specifications
- Other Name: Manifold, Engine Fuel Intake Manifold
- Replaces: 55508160, 55599799
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2019 Chevrolet Equinox | LT, Premier | 4 Cyl 1.6 L DIESEL
View related parts
Chevrolet Equinox Intake Manifold
Part Number: 25204428
$158.94 MSRP: $250.09
You Save: $91.15 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold Assembly-Intake (W/Throttle Body); Manifold, Engine Fuel Intake Manifold
- Replaced by: 25206910
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023-2024 Chevrolet Equinox | LS, LT, Premier, RS | 4 Cyl 1.5 L GAS
View related parts
Chevrolet Equinox Intake Manifold
Part Number: 12683666
$180.59 MSRP: $284.02
You Save: $103.43 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold Assembly-Intake (W/Throttle Body); Engine Intake Manifold; Manifold, Engine Fuel Intake Manifold
- Replaced by: 25206906
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2022 Chevrolet Equinox | L, LS, LT, Premier, RS | 4 Cyl 1.5 L GAS
View related parts
Chevrolet Equinox Intake Manifold
Part Number: 12646130
$211.38 MSRP: $362.95
You Save: $151.57 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold, Engine Fuel Intake Manifold; Engine Intake Manifold
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2020 Chevrolet Equinox | LT, Premier | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Equinox Intake Manifold, Lower
Part Number: 12611205
$407.57 MSRP: $641.01
You Save: $233.44 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold Assembly-Lower Intake; Manifold, Engine Fuel Intake Manifold
- Position: Lower
- Replaces: 12575084
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2009 Chevrolet Equinox | LS, LT | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Equinox Intake Manifold
Part Number: 12611155
$319.72 MSRP: $526.71
You Save: $206.99 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold, Engine Fuel Intake Manifold; Engine Intake Manifold
- Position: Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013-2017 Chevrolet Equinox | LT, LTZ, Premier | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Equinox Intake Manifold
Part Number: 12634205
Product Specifications
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2012 Chevrolet Equinox | LT, LTZ
View related parts
Chevrolet Equinox Intake Manifold
Part Number: 19371505
Product Specifications
- Other Name: Manifold, Engine Fuel Intake Manifold
- Replaces: 12571079, 92068635
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2009 Chevrolet Equinox | Sport | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Equinox Intake Manifold
Part Number: 12597697
Product Specifications
- Other Name: Manifold, Engine Fuel Intake Manifold
- Position: Upper
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chevrolet Equinox | LS, LT | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Equinox Intake Manifold
Part Number: 12591901
Product Specifications
- Other Name: Manifold, Engine Fuel Intake Manifold
- Position: Upper
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005 Chevrolet Equinox | LS, LT | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Equinox Intake Manifold
Part Number: 12591211
Product Specifications
- Other Name: Manifold, Engine Fuel Intake Manifold
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2009 Chevrolet Equinox | Sport | 6 Cyl 3.6 L GAS

Chevrolet Equinox Intake Manifold

Our website offers an extensive catalog of genuine Chevrolet Equinox Intake Manifold at unbeatable prices. Every OEM Chevrolet Equinox Intake Manifold comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Equinox Intake Manifold Parts Questions & Experts Answers

Intake Manifold, Lower
12611205
Q: How to replace the lower intake manifold on Chevrolet Equinox?
A: Draining the cooling system should be your first step followed by removing the upper Intake Manifold and heater inlet pipe and separating the radiator inlet hose from the Thermostat Housing. After filling the cooling system owners should reinstall the Fuel Rail assembly followed by installing the radiator inlet hose to the Thermostat Housing and the heater inlet pipe then the upper Intake Manifold. Start by removing the Thermostat and housing and continue with the Rocker Arms and push rods and finally the lower Intake Manifold gaskets if a new lower Intake Manifold is installed. Clean all gasket mating surfaces by using gm p/n 12346139 (Canadian P/N 10953463) or an equivalent cleaning agent and avoid placing rtv sealer on the engine block before installing manifold gaskets. Install first the lower Intake Manifold gaskets and then the rocker arms, push rods, lower Intake Manifold seals. Install the lower Intake Manifold following an rtv sealer application with gm p/n 12346141 (Canadian P/N 10953433). New fasteners provide optimal gasket performance when fitted with thread-locking patches or when old fasteners receive a thread-locking chemical application. All lower Intake Manifold bolts require gm p/n 1234382 (Canadian P/N 10953489) or equivalent for cleaning up and clearing off foreign materials. Proper torque distribution requires complete center bolt torque before moving to diagonal bolts with specific torque settings attainable through crows foot type tools targeting locations and . On the first pass, tighten the lower Intake Manifold bolts (1, 2, 3, 4) in sequence to 7 nm (62 inch lbs.), then on the final pass, tighten them to 13 nm (115 inch lbs.)after initial light tightening (5, 6, 7, 8), torque the bolts in a specified order to 25 nm (18 ft. Lbs.). The final procedure requires re-mounting the Fuel Rail assembly while attaching the radiator inlet hose to the Thermostat Housing then installing the heater inlet pipe and upper Intake Manifold before completing the cooling system fill-up.

Related Chevrolet Equinox Parts

Browse Chevrolet Equinox Intake Manifold by Years

2024 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005