OEM Chevrolet HHR Flywheel

Chevrolet HHR Flywheel Parts Questions & Experts Answers

• Drive Plate, Green Line
  12647333
  Q: How to replace the engine flywheel on Chevrolet HHR?

  A: The first step to replace an engine Flywheel includes automatic transaxle removal followed by clutch removal on vehicles equipped with manual transmissions. Mount the crankshaft balancer onto the holder seen as j 38122-a. The edge of an 18 mm socket might need its chamfer (bevel) removed to access the compact Flywheel bolts effectively. The procedure to replace the automatic transaxle Flywheel requires discarding its bolts and then removing it altogether. It is essential to remove the chamfer from the 18 mm socket if you are using it. Before removing the manual transaxle Flywheel follow the steps of removing all relevant manual transaxle Flywheel bolts and then remove the manual transaxle Flywheel itself. A nylon bristle brush should be used to remove thread adhesive buildup inside crankshaft holes. Install the manual transaxle Flywheel initially with its bolts afterward before applying torque at 53 n.m (39 lb ft) and additional 25-degree angle using the angle meter (J 45059). First install the automatic transaxle Flywheel when present after adding the new automatic transaxle Flywheel bolts that receive the identical tightening procedure. Rip off the crankshaft balancer holder (J 38122-A) then add the clutch hardware when using a manual transaxle system but connect the transaxle components with an automatic transmission.