How to replace the Release Hood Cable on Chevrolet Impala?

Start by unclosing the hood and blocking the Hood Latch so it cannot secure until you install the new cable. The Hood Cable requires removal through retainer squeezing before withdrawing it from its bracket on the Hood Latch. First remove the air cleaner as well as the retainers connected to the upper tie bar and engine compartment side rail. After separating the cable from the hood release handle pull the carpet back as you reach the cable endpoint which should stay inside the passenger compartment. The end of the Hood Cable requires attachment to your wire or string for easier new cable installation. Handle the grommet removal from the dash by using a flat-bladed tool and replace the Hood Cable from the dash afterward before you pull out the wire or string. To install the new Hood Cable you should tie the wire or string to it before pulling it through the dash until the grommet seats correctly and then complete grommet installation. The process ends by attaching cable retainers to engine bay side rails while connecting the Hood Latch to the new cable before reinstalling the air filter and cable attachment to the hood release handle. To finish the installation you need to reposition the carpet and remove the block from the Hood Latch while conducting an operation check of the cable before removing the hood.

OEM Chevrolet Impala Hood Cable

Hood Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Hood Cables found

View related parts
Chevrolet Impala Release Cable
Part Number: 23434316
$43.89 MSRP: $65.33
You Save: $21.44 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Hood Latch; Hood Release Cable
- Replaces: 23439956, 22770129, 13312787, 20944973
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2020 Chevrolet Impala | Eco, LS, LT, LTZ, Premier | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Release Cable
Part Number: 22770129
$43.89 MSRP: $65.33
You Save: $21.44 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Hood Latch; Hood Release Cable
- Replaced by: 23434316
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2015 Chevrolet Impala | Eco, LS, LT, LTZ | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Release Cable
Part Number: 13503692
$27.28 MSRP: $40.61
You Save: $13.33 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle, Hood Latch; Hood Release Cable; Release Handle
- Replaces: 95196696
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2015 Chevrolet Impala | Eco, LS, LT, LTZ | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Release Cable
Part Number: 10311086
$66.06 MSRP: $98.32
You Save: $32.26 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Hood Latch; Hood Release Cable
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2013 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Handle
Part Number: 10289335
Product Specifications
- Other Name: Handle, Hood Latch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2013 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Release Cable
Part Number: 10259265
$39.51 MSRP: $58.81
You Save: $19.30 (33%)
Product Specifications
- Other Name: Cable, Hood Latch; Hood Release Cable
- Replaces: 10161931
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Impala | SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Release Cable
Part Number: 20006122
Product Specifications
- Other Name: Cable, Hood Latch; Hood Release Cable
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1985 Chevrolet Impala | Base | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Release Cable
Part Number: 1716424
Product Specifications
- Other Name: Cont Assembly Hood *See Desc; Hood Release Cable; Control, Hood Latch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1985 Chevrolet Impala | Base | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Release Cable
Part Number: 10407412
Product Specifications
- Other Name: Cable, Hood Latch; Hood Release Cable
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Impala | Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Impala Release Handle
Part Number: 10285029
Product Specifications
- Other Name: Handle, Hood Latch; Handle
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Impala | Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS

Chevrolet Impala Hood Cable

Our website offers an extensive catalog of genuine Chevrolet Impala Hood Cable at unbeatable prices. Every OEM Chevrolet Impala Hood Cable comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Impala Hood Cable Parts Questions & Experts Answers

Release Handle
10285029
Q: How to replace the Release Hood Cable on Chevrolet Impala?
A: Start by unclosing the hood and blocking the Hood Latch so it cannot secure until you install the new cable. The Hood Cable requires removal through retainer squeezing before withdrawing it from its bracket on the Hood Latch. First remove the air cleaner as well as the retainers connected to the upper tie bar and engine compartment side rail. After separating the cable from the hood release handle pull the carpet back as you reach the cable endpoint which should stay inside the passenger compartment. The end of the Hood Cable requires attachment to your wire or string for easier new cable installation. Handle the grommet removal from the dash by using a flat-bladed tool and replace the Hood Cable from the dash afterward before you pull out the wire or string. To install the new Hood Cable you should tie the wire or string to it before pulling it through the dash until the grommet seats correctly and then complete grommet installation. The process ends by attaching cable retainers to engine bay side rails while connecting the Hood Latch to the new cable before reinstalling the air filter and cable attachment to the hood release handle. To finish the installation you need to reposition the carpet and remove the block from the Hood Latch while conducting an operation check of the cable before removing the hood.