Other Name: Bracket, Engine Lift; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Mount Bracket; Strut Bracket; Strut Mount Bracket; Strut Lower Bracket; Bracket, Engine Mounting
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1990-1997 Chevrolet Lumina | Base, Euro, LS, LTZ, Z34 | 4 Cyl 2.5 L GAS, 6 Cyl 3.1 L FLEX, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
Other Name: Bracket; Engine Mount Torque Strut; Engine Mount Bracket; Transmission Mount; Motor Mount; Strut Mount Bracket, Compressor Front Bracket, Torque Strut Bracket, A/C Compressor Mounting, Engine Mounting
Position: Passenger Side
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1990 Chevrolet Lumina | Base, Euro | 6 Cyl 3.1 L GAS
Other Name: Bracket, Engine Lift; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Lift Bracket; Strut Mount Bracket; Mount Bracket Brace; Bracket, Engine Mounting
Position: Driver Side
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1990-1994 Chevrolet Lumina | Base, Euro | 6 Cyl 3.1 L FLEX, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
Other Name: Bracket A; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Support Brace; Mount Brace; Mount Bracket Brace; Bracket, Engine Mounting
Position: Front
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1991-1997 Chevrolet Lumina | Euro, LS, LTZ, Z34 | 6 Cyl 3.4 L GAS
Other Name: Stop, Engine Mounting; Mount Plate; Plate; Plate, Engine Mounting
Position: Driver Side
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1990-2001 Chevrolet Lumina | Base, Euro, LS, LTZ, Z34 | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.1 L FLEX, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
Other Name: Stop, Engine Mounting; Mount Plate; Plate; Plate, Engine Mounting
Position: Passenger Side
Replaces: 20619574
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1990-2001 Chevrolet Lumina | Base, Euro, LS, LTZ, Z34 | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.1 L FLEX, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
| Page 1 of 2 |Next >
1-20 of 22 Results
Chevrolet Lumina Engine Mount Bracket
Our website offers an extensive catalog of genuine Chevrolet Lumina Engine Mount Bracket at unbeatable prices. Every OEM Chevrolet Lumina Engine Mount Bracket comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Lumina Engine Mount Bracket Parts Questions & Experts Answers
Q: How to replace the Engine Mount Bracket on Chevrolet Lumina?
A: You need to start the replacement work by detaching the negative cable connecting to the car battery. Begin the repair by first removing the throttle body air inlet duct as well as the engine mount struts then raise the vehicle and find a suitable support point. To begin install the three-way catalytic converter pipe from the right Exhaust Manifold and the right front wheel along with tire and the right engine splash shield need to be removed. Start by taking off the three bolts that connect the Engine Mount Bracket to the Oil Pan and after that remove the upper engine mount nuts followed by unmounting the bracket from the engine mount. To install the system begin with the Engine Mount Bracket attachment to the mount followed by upper nut installation with a torque setting of 47 nm (35 ft. Lbs.). The Engine Mount Bracket requires installation onto the Oil Pan with Engine Mount Bracket-to-Oil Pan bolts which need to be tightened to 58 nm (43 ft. Lbs.). You must reinstall the right engine splash shield together with the right front wheel and tire before finalizing the connection of the three-way catalytic converter pipe to the right (rear) exhaust manifold. Lower the vehicle then remove the engine support fixture (J28467-B) together with the engine support adapter leg set (J36462-A) and the engine support adapters (J28467-9OA). The last step involves mounting the engine struts followed by installation of the throttle body air duct and then reattaching the ground (-) Battery Cable.