Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2016-2019 Chevrolet Malibu | Hybrid | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV)
Chevrolet Malibu Coolant Reservoir
Our website offers an extensive catalog of genuine Chevrolet Malibu Coolant Reservoir at unbeatable prices. Every OEM Chevrolet Malibu Coolant Reservoir comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Malibu Coolant Reservoir Parts Questions & Experts Answers
Q: How to Service and Repair the Coolant Reservoir on a Chevrolet Malibu?
A: In order to replace the coolant reservoir, drain the coolant first. From below the platform, use the Hose Clamp Pliers (J 38185) to move the coolant reservoir inlet hose clamp to the coolant reservoir, and then remove the inlet hose. Flex the coolant reservoir mounting tabs outwards to allow it to overcome the bracket and disconnect the coolant level sensor wire harness connector. Once again with the help of the Hose Clamp Pliers (J 38185), reposition the coolant reservoir outlet hose clamp and pull out the outlet hose before you pull out the coolant reservoir. When installing, connect the outlet hose to the coolant reservoir and move the outlet hose clamp with the Hose Clamp Pliers (J 38185). Attach the coolant level sensor wire harness connector, tilt the coolant reservoir to direct the weld seam under the ribs at the rear portion of its mounting bracket, press down to catch the mounting tabs and hence pull the upward enabling the tabs to lock into the bracket. Next, install hose - inlet and relocate inlet hose clamp with the Hose Clamp Pliers (J 38185). Lastly, drain the coolant and put a coolant reservoir cap on it.