How to replace the door striker anchor plate on Chevrolet Monte Carlo?

Before changing the door striker anchor plate you need to take off the front or rear door lock pillar trim for access. Proceed by removing the Front Striker upper part from the center pillar and the Front Striker lower segment from the center pillar. The installation process begins by taking off the quarter lower trim panel which is also known as (Rear Striker). Apply a grease pencil to mark the striker location before removing the screws holding the front door lock striker and afterward removing the striker alongside the shims and anchor plate. The process starts by putting in the anchor plate followed by the door lock shims and striker and ends with striker screws installation. Tighten the door lock striker screws to 25 Nm (18 lb ft) after positioning it at the marked place. The door lock striker may need adjustment if needed. The final step involves reinstalling the front or rear trim panels through placement of center pillar upper trim panel (Front Striker), center pillar lower trim panel (Front Striker) while also reinstalling quarter lower trim panel (Rear Striker).

OEM Chevrolet Monte Carlo Door Striker

Door Lock Striker

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Door Strikers found

View related parts
Chevrolet Monte Carlo Lock Striker, Front
Part Number: 15013147
$23.44 MSRP: $34.89
You Save: $11.45 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Striker, Front Side Door Lock; Lock Cylinder Striker; Actuator Striker; Lock; Striker; Striker, Door Lock Striker
- Position: Front
- Replaces: 20151274
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1988 Chevrolet Monte Carlo | Base, LS, SS | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Chevrolet Monte Carlo Striker, Rear
Part Number: 10442728
$21.35 MSRP: $31.76
You Save: $10.41 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Striker Assembly-Rear Compartment Lid Latch
- Position: Rear
- Replaces: 10295278, 10442729
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2004 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Striker
Part Number: 86785938
$5.15 MSRP: $7.67
You Save: $2.52 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Striker Assembly-Front Side Door Latch *Bright; Striker, Door Lock Striker
- Replaces: 22721425
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2007 Chevrolet Monte Carlo | LS, LT, LTZ, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Monte Carlo Striker, Rear
Part Number: 25803480
Product Specifications
- Other Name: Striker Assembly-Rear Compartment Lid Latch; Striker, Rear Compartment Lid Lock Or Liftgate
- Position: Rear
- Replaces: 10309115, 10319357, 10327301
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2007 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Monte Carlo Striker, Black
Part Number: 16629888
Product Specifications
- Other Name: Striker, Door Lock Striker
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2006 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Monte Carlo Striker
Part Number: 10295195
Product Specifications
- Other Name: Striker, Instrument Panel Compartment Door Lock And Console Compartment Door Lock
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007, 2000-2005 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Monte Carlo Striker, Rear
Part Number: 10273674
Product Specifications
- Other Name: Striker-Rear Compartment Lid Lock; Striker, Rear Compartment Lid Lock Or Liftgate
- Position: Rear
- Replaces: 10124770
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1999 Chevrolet Monte Carlo | LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS

Chevrolet Monte Carlo Door Striker

Our website offers an extensive catalog of genuine Chevrolet Monte Carlo Door Striker at unbeatable prices. Every OEM Chevrolet Monte Carlo Door Striker comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Monte Carlo Door Striker Parts Questions & Experts Answers

Striker, Rear
10442728
Q: How to replace the door striker anchor plate on Chevrolet Monte Carlo?
A: Before changing the door striker anchor plate you need to take off the front or rear door lock pillar trim for access. Proceed by removing the Front Striker upper part from the center pillar and the Front Striker lower segment from the center pillar. The installation process begins by taking off the quarter lower trim panel which is also known as (Rear Striker). Apply a grease pencil to mark the striker location before removing the screws holding the front door lock striker and afterward removing the striker alongside the shims and anchor plate. The process starts by putting in the anchor plate followed by the door lock shims and striker and ends with striker screws installation. Tighten the door lock striker screws to 25 Nm (18 lb ft) after positioning it at the marked place. The door lock striker may need adjustment if needed. The final step involves reinstalling the front or rear trim panels through placement of center pillar upper trim panel (Front Striker), center pillar lower trim panel (Front Striker) while also reinstalling quarter lower trim panel (Rear Striker).