OEM Chevrolet Prizm Bumper

Chevrolet Prizm Bumper Parts Questions & Experts Answers

• Bumper Cover
  94857148
  Q: How to properly remove and install the bumper on a Chevrolet Prizm?

  A: The process of replacing a rear bumper fascia starts with opening the rear compartment lid before removing the left rear end trim finish panel and right rear end trim finish panel as well as the rear compartment sill trim plate. You must remove the license plate lamps from the rear fascia of the bumper. First remove all 4 nuts fastening the central section then disconnect both bottom plastic retainers and the 3 nuts from each side. Pull the rear bumper fascia backward before taking it off from the vehicle. The installation process starts with attaching the rear bumper fascia to the vehicle by tightening the 3 nuts located at the sides as well as the 2 plastic retainers at the bottom and 4 nuts at the center to 20 N.m (15 lb ft). Reinstall the license plate lamps before installing left and right rear end trim finish panels and rear compartment sill trim plate to finish the task by closing the rear compartment.