OEM Chevrolet Tracker Brake Disc

Chevrolet Tracker Brake Disc Parts Questions & Experts Answers

• Rotor
  30024673
  Q: How to Replace the Brake Disc on Chevrolet Tracker?

  A: Transferring two-thirds of brake fluid from the master cylinder reservoir using a siphon tool is the first step towards replacing the Brake Disc. First lift the vehicle. After that take off both tire and wheel assembly. Clamp the c tool onto both caliper and outer pad before tightening down until the piston touches bottom. Take off two mounting bolts first, along with the caliper and caliper bracket unit. Raise the combined parts from the disc keeping the flexible brake hoses from supporting the brake components to avoid damage. Secure the caliper-unit with wire to safeguard brake hoses from harm during work. Check the Brake Disc for changes in depth across its surface plus side wobble and wear signs. Use two 8 mm bolts to aid removal of the Brake Disc from its Wheel Hub. Install the new Brake Disc by setting it over the hub according to proper fastener procedures. Install the caliper bracket assembly by tightening its 2 mounting bolts to 85 nm (61.5 foot-pounds). Put back the tire and wheel set then put the vehicle down while filling the master cylinder tank. Release the Brake Pedal and activate the engine while pushing the pedal multiple times for bracket piston positioning.