Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1995-2001 GMC Jimmy | Base, Diamond Edition, Envoy, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
| Page 1 of 2 |Next >
1-20 of 22 Results
GMC Jimmy Brake Line
Our website offers an extensive catalog of genuine GMC Jimmy Brake Line at unbeatable prices. Every OEM GMC Jimmy Brake Line comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
GMC Jimmy Brake Line Parts Questions & Experts Answers
Q: How to replace the front brake line on a dual piston caliper on GMC Jimmy?
A: To replace front brake hose in the vehicle with a dual piston, first, lift and support the vehicle properly. Unmount the front tire and wheel assembly, then hose fitting on both ends and cleanse, rid the hose fitting of dirt grease and foreign material. Put a container under the hose to collect any dripping brake fluid, replace brake pipe fitting, and remove the brake pipe retainer. Next, remove the front flex hose support bracket nut and bolt, and also the abs sensor wire bracket bolt from the upper Control Arm. Next, take off the front brake hose bolt and gasket from the caliper, and then remove the front brake hose. For installation, make sure that the front flex hose is not twisted and does not touch other components. Replace the brass gasket with a new one, connect the front brake hose to the brake caliper, and fasten the front brake hose bolt up to 54 nm (40 ft. Lbs.). Put the abs sensor wire bracket bolt and lock it into place with 17 nm (13 ft. Lbs.), put the front brake hose support bracket bolt and nut tighten its nut into place with 22nm 16ft. Lbs. Mount the retainer of the front brake pipe, connect the brake pipe fitting to the brake hose and tighten to 17 nm (13 ft. Lbs.). Bleed the brake system, unload the front tires and its attachment, and lastly, take the safety stands away and lower the vehicle.