Other Name: Seal, Transmission Extension; Manual Transmission Housing Seal; Gasket Set.; Seal, Transmission Main Shaft; Seal, Rear Bearing Retaining
Position: Rear
Replaces: 15635281
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1999-2006 GMC Sierra 1500 | Base, HT, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
GMC Sierra 1500 Transfer Case Seal
Our website offers an extensive catalog of genuine GMC Sierra 1500 Transfer Case Seal at unbeatable prices. Every OEM GMC Sierra 1500 Transfer Case Seal comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
GMC Sierra 1500 Transfer Case Seal Parts Questions & Experts Answers
Q: How to replace the rear output transfer case seal on GMC Sierra 1500?
A: The procedure to replace rear output shaft seal starts with suitable vehicle support and correct vehicle lifting. Users must remove the transfer case shield first when present alongside the rear propeller shaft. A flat-tipped screwdriver can be used to pry the rear output shaft seal until removal. The j 45756 output shaft seal installer should be used for new front output shaft seal installation. Reinstallation of the rear propeller shaft should follow before checking for correct fluid levels with possible fluid addition if needed. Close the procedure by reinstalling the transfer case shield (when applicable) then put down the vehicle.