Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2007-2009 GMC Yukon XL 1500 | SLE, SLT | 8 Cyl 6.0 L GAS
GMC Yukon XL 1500 Brake Line
Our website offers an extensive catalog of genuine GMC Yukon XL 1500 Brake Line at unbeatable prices. Every OEM GMC Yukon XL 1500 Brake Line comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
GMC Yukon XL 1500 Brake Line Parts Questions & Experts Answers
Q: How to replace the rear jounce brake line on GMC Yukon XL 1500?
A: During the process of replacing the rear jounce brake hose, first, lift and support the vehicle. Clean all dirt, grease or foreign material from the hose fittings, and then detach the jounce hose from the brake pipe to the frame. Unscrew the jounce hose retaining clip and proceed to remove the jounce hose from the bracket. Next, remove the left and right brake pipes from the junction block of the jounce hose, and then remove the junction block mounting bolt from axle until the jounce hose comes out completely. For installation, place the jounce hose without twisting it, fasten to the axle the jounce hose junction block mounting bolt, tightening to 12 nm (106 in. Lbs.). Connect the brake pipes from both sides to the jounce hose junction block, with fitting done tight at 25 nm (18 ft. Lbs.). You must reinstall the jounce hose onto the bracket and secure it to the bracket with retaining clip and connect it at the frame into the brake pipe by locking the fitting to 25 nm(18 ft. Lbs.). Lastly, bleed the brake system, and take off the safety stands and put the vehicle down.