How to replace the front wheel bearing, hub, and seal on GMC Yukon XL 1500?

For front Wheel Hub replacement start by supporting the car and removing the tire and wheel then brake rotor. Separate the Wheel Speed Sensor and brake hose bracket bolt from the Steering Knuckle before disconnecting the Wheel Speed Sensor electrical connection. Unfasten the 15 series Wheel Hub and bearing mount bolts as well as the 25 series Wheel Hub bearing bolts. Then remove the Wheel Hub bearing assembly and splash shield. Take the o-ring seal from the Steering Knuckle hole (25 Series) and Wheel Speed Sensor bolt. Check and test the o-ring (25 Series) for damage before replacing it. First clean both the Steering Knuckle bore and hub and bearing surfaces then apply Wheel Bearing grease in the knuckle bore before installing the o-ring seal onto the knuckle. Position the Wheel Hub and bearing unit properly on the Steering Knuckle after installing the Wheel Speed Sensor bolt at 18 nm (13 ft. Lbs.) tension. Also install the hub assembly into the vehicle (25 Series) or the Steering Knuckle (15 Series) alongside the shelter (splash shield). Adjust the Wheel Hub and bearing bolts in the Steering Knuckle (15 Series) and (25 Series) until they apply 180 newton-meters (133 foot pounds) of torque. Use Wheel Speed Sensor electrical power supply. Connect the sensor bolt to Steering Knuckle first then secure it at 12 nm (106 inch lbs) before placing rotor on the wheel.

OEM GMC Yukon XL 1500 Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Wheel Bearings found

View related parts
GMC Yukon XL 1500 Wheel Bearing, Rear
Part Number: 12479031
$49.62 MSRP: $96.32
You Save: $46.70 (49%)
ADD TO CART
Product Specifications
- Other Name: Bearing, Rear Axle Shaft; Wheel Bearing Kit; Axle Bearing; Axle Bearings; Shaft Bearings; Outer Bearing; Bearing; Bearing, Rear Wheel
- Position: Rear
- Replaces: 09442126, 9442126
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2014 GMC Yukon XL 1500 | Denali, SL, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon XL 1500 Output Shaft Bearing, Front
Part Number: 26066885
$30.31 MSRP: $56.92
You Save: $26.61 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Front Axle; Differential Pinion Bearing; Wheel Bearing; Axle Bearing; Inner Pinion Bearing; Bearing, Front Axle And Axle Center
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014, 2000-2005 GMC Yukon XL 1500 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon XL 1500 Wheel Bearing
Part Number: 9439561
$72.53 MSRP: $131.28
You Save: $58.75 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rear Wheel Bearing; Axle Bearing; Axle Bearings; Shaft Bearings; Outer Bearing; Bearing; Bearing, Rear Axle Shaft; Bearing, Rear Wheel
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2007 GMC Yukon XL 1500 | Denali, SL, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
GMC Yukon XL 1500 Wheel Bearing
Part Number: 9436881
$76.25 MSRP: $145.36
You Save: $69.11 (48%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential; Differential Pinion Bearing; Differential Bearing; Axle Bearings; Shaft; Inner; Side; Differential Gear; Front Wheel; Rear Wheel; Nut.
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2009, 2000-2006 GMC Yukon XL 1500 | Denali, SL, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
GMC Yukon XL 1500 Wheel Bearing
Part Number: 9428908
$69.42 MSRP: $98.04
You Save: $28.62 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Rear Wheel Outer; Axle Bearings, Shaft Bearings, Grease Cap, Outer Bearing, Bearing Assembly, Front Wheel Outer, Rear Wheel.
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2009, 2002-2006 GMC Yukon XL 1500 | Denali, SL, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
GMC Yukon XL 1500 Hub & Bearing, Front
Part Number: 15863440
$151.99 MSRP: $294.98
You Save: $142.99 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly-Front Wheel (W/Wheel Speed Sensor); Wheel Bearing & Hub Repair Kit.
- Position: Front
- Replaced by: 84856648
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2006 GMC Yukon XL 1500 | Denali, SL, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
GMC Yukon XL 1500 Front Hub
Part Number: 84856653
$238.85 MSRP: $463.56
You Save: $224.71 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly-Front Wheel (W/ Bearing & Wheel Speed Sensor); Wheel Hub Repair Kit; Wheel Bearing; Axle Bearing; Wheel Hub; Hub & Bearing; Hub, Front Wheel
- Position: Front
- Replaces: 10393170, 20883242, 84356642, 25819677, 22841380
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 GMC Yukon XL 1500 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon XL 1500 Front Hub
Part Number: 15233113
Product Specifications
- Other Name: Hub, Front Wheel (W/Wheel Speed Sensor); Wheel Bearing & Hub Assembly; Repair Kit; Axle Bearing.; Hub & Bearing; Hub
- Position: Front
- Replaces: 15112382, 15134584, 15740291
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2006 GMC Yukon XL 1500 | Denali, SL, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
GMC Yukon XL 1500 Front Hub
Part Number: 20980075
$424.36 MSRP: $761.18
You Save: $336.82 (45%)
Product Specifications
- Other Name: Hub Assembly-Front Wheel (W/ Bearing & Sensor); Wheel Bearing & Hub Repair Kit.; Hub & Bearing; Hub; Hub, Front Wheel
- Position: Front
- Replaces: 15910968, 20835869, 25964540
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2013 GMC Yukon XL 1500 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS

GMC Yukon XL 1500 Wheel Bearing

Our website offers an extensive catalog of genuine GMC Yukon XL 1500 Wheel Bearing at unbeatable prices. Every OEM GMC Yukon XL 1500 Wheel Bearing comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

GMC Yukon XL 1500 Wheel Bearing Parts Questions & Experts Answers

Wheel Bearing
9439561
Q: How to replace the front wheel bearing, hub, and seal on GMC Yukon XL 1500?
A: For front Wheel Hub replacement start by supporting the car and removing the tire and wheel then brake rotor. Separate the Wheel Speed Sensor and brake hose bracket bolt from the Steering Knuckle before disconnecting the Wheel Speed Sensor electrical connection. Unfasten the 15 series Wheel Hub and bearing mount bolts as well as the 25 series Wheel Hub bearing bolts. Then remove the Wheel Hub bearing assembly and splash shield. Take the o-ring seal from the Steering Knuckle hole (25 Series) and Wheel Speed Sensor bolt. Check and test the o-ring (25 Series) for damage before replacing it. First clean both the Steering Knuckle bore and hub and bearing surfaces then apply Wheel Bearing grease in the knuckle bore before installing the o-ring seal onto the knuckle. Position the Wheel Hub and bearing unit properly on the Steering Knuckle after installing the Wheel Speed Sensor bolt at 18 nm (13 ft. Lbs.) tension. Also install the hub assembly into the vehicle (25 Series) or the Steering Knuckle (15 Series) alongside the shelter (splash shield). Adjust the Wheel Hub and bearing bolts in the Steering Knuckle (15 Series) and (25 Series) until they apply 180 newton-meters (133 foot pounds) of torque. Use Wheel Speed Sensor electrical power supply. Connect the sensor bolt to Steering Knuckle first then secure it at 12 nm (106 inch lbs) before placing rotor on the wheel.

Related GMC Yukon XL 1500 Parts

Browse GMC Yukon XL 1500 Wheel Bearing by Years

2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000