Make sure this part fits

GM 15209933
Junction Block

2005-2008 GM

Customer Questions & Expert Answers (8)
GM 15209933 Junction Block
  • Part Description
    Block, Main Wiring Junction And Fuse Block; Junction Boxes; Fuse Box
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2007 Buick TerrazaCX, CXL6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2005-2008 Chevrolet UplanderBase, LS, LT6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2005-2006 Pontiac MontanaSV66 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2005-2007 Saturn Relay1, 2, 36 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15209933 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15209933 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should you do after disconnecting the positive battery cable for the 2005 Buick Terraza? Posted by Customer
    A:
    Release the 2 locking tabs from the base side of the electrical center and carefully lift each side of the underhood accessory wiring junction block assembly to release it from the 3 main body harness connectors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuse Box
    Q:
    What is the first step to replace the Instrument Panel Electrical Center or Junction Block for the 2006 Buick Terraza? Posted by Customer
    A:
    Disconnect the negative battery cable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuse Box
    Q:
    What is the preparation step before installing the new I/P wiring harness junction block for the 2007 Buick Terraza? Posted by Customer
    A:
    Re-stage the connectors into the lower I/P accessory wiring junction block assembly base/shroud and ensure the main harness is secured into the lower shroud/base.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuse Box
    Q:
    What should be done after securing the additional connectors for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Position the I/P wiring harness junction block bracket back to the I/P carrier bracket studs and install the nuts, tightening them to 10 N.m (89 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuse Box
    Q:
    What should be done after connecting the additional connectors for the 2005 Chevrolet Uplander? Posted by Customer
    A:
    Position the I/P wiring harness junction block bracket back to the I/P carrier bracket studs and install the nuts, tightening them to 10 N.m (89 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuse Box
    Q:
    What is the purpose of the hook tool during installation for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    To pull the connector upward to secure the connectors into the base.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuse Box
    Q:
    What is the first step to replace the underhood electrical center or junction block for the 2006 Chevrolet Uplander? Posted by Customer
    A:
    Open and support the hood, then disconnect the negative battery cable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuse Box
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Junction Block 15209933 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15209933 Junction Block is available in the market under the name GM Fuse Box. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15209933 Junction Block fits certain Chevrolet Uplander models, as well as Buick Terraza. Additionally, it is compatible with Pontiac Montana and Saturn Relay models.
The original GM component designated by manufacturer part number 15209933 maintains top performance when functioning as the Block, Main Wiring Junction And Fuse Block; Junction Boxes; Fuse Box unit. The component 15209933 is constructed from durable material and its dimensions span 15.0 x 8.1 x 6.8 inches while weighing 1.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Block, Wiring Junction. The part 15209933 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.