Make sure this part fits

GM 18048079
Caliper

2003-2011 GM

Customer Questions & Expert Answers (12)
GM 18048079 Caliper
  • Part Description
    Brake Caliper
  • Position
    Rear
  • Manufacturer
    General Motors
Make sure this part fits
$192.39 MSRP: $343.58
You Save: $151.19 (44%)
Core Charge: $40.00
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2011 Cadillac DTSBase, Livery, Luxury, Platinum, Premium8 Cyl 4.6 L GAS
    2003-2005 Chevrolet Silverado 1500Base, Hybrid, LS, LT, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005, 2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2003-2005 GMC Sierra 1500Base, Denali, Hybrid, SL, SLE, SLT, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005, 2003 GMC Sierra 1500 HDSLE, SLT8 Cyl 6.0 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 18048079 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 18048079 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How should the brake caliper pin bolts and retainers be prepared if reused for the 2008 Cadillac DTS? Posted by Customer
    A:
    Clean them with denatured alcohol and dry with non-lubricated, filtered air.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be ensured during the bleeding process for the 2009 Cadillac DTS? Posted by Customer
    A:
    Ensure proper seating of the brake caliper pistons and brake pads.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the torque specification for the pin bolts for the 2010 Cadillac DTS? Posted by Customer
    A:
    Tighten them to 113 Nm (83 lb ft) using new copper brake hose gaskets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done when assembling the brake hose bolt for the 2006 Cadillac DTS? Posted by Customer
    A:
    Use new copper brake hose gaskets and tighten it to 45 Nm (33 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done after compressing the caliper pistons for the 2007 Cadillac DTS? Posted by Customer
    A:
    Remove the C-clamp and detach the brake hose to caliper bolt, discarding the 2 copper brake hose gaskets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What specific steps are required for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    Remove any original adhesive patch, clean the bolt threads with brake parts cleaner, and apply Threadlocker GM P/N 12345493 (Canadian P/N 10953488) before installing the caliper guide pin bolts, tightening them to 42 Nm (31 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How do you install the new caliper for the 2005 Chevrolet Silverado 1500? Posted by Customer
    A:
    Install the new caliper onto the caliper bracket and secure it with the brake caliper bolts, tightening them to 100 Nm (74 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What precautions should be taken when applying compressed air to remove the piston for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    Use clean cloths to pad the interior of the caliper housing and place a 25 mm (1 inch) block of wood between the caliper and the piston.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the final step in the process for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Install the brake caliper back onto the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How do you prevent fluid loss and contamination before removing the brake hose for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    Clean the brake hose fitting and install a rubber cap or plug on the exposed brake pipe fitting.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be inspected on the caliper for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    Inspect the caliper bores and piston seal grooves for any scoring or corrosion; if excessive damage is found, replace the brake caliper.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Caliper 18048079 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 18048079 Caliper is available in the market under the name GM Brake Calipers. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 18048079 Caliper fits certain Chevrolet Silverado 1500, Silverado 1500 HD models, as well as GMC Sierra 1500, Sierra 1500 HD. Additionally, it is compatible with Cadillac DTS models.
The original GM component designated by manufacturer part number 18048079 maintains top performance when functioning as the Brake Caliper unit at its Rear. The component 18048079 is constructed from durable material and its dimensions span 8.9 x 7.8 x 6.4 inches while weighing 5.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Caliper, Wheel Brake Cylinder/Caliper. The part 18048079 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.