Make sure this part fits

GM 19366700
Flex Hose, Rear Driver Side

1999-2007 GM

Customer Questions & Expert Answers (14)
GM 19366700 Flex Hose, Rear Driver Side
GM 19366700 Flex Hose, Rear Driver Side
  • Part Description
    Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line
  • Position
    Rear Driver Side
  • Replaced By
    19540524
  • Replaces
    15102333, 15075746, 15748046, 21999528, 22163613, 15884702
  • Manufacturer
    General Motors
Make sure this part fits
$48.39 MSRP: $90.88
You Save: $42.49 (47%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    1999-2007 Chevrolet Silverado 1500Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    1999-2007 GMC Sierra 1500Base, C3, Denali, HT, Hybrid, SL, SLE, SLT, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
    2007 GMC Sierra 1500 ClassicDenali, Hybrid, SL, SLE, SLT, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 GMC Sierra 1500 HDSLE, SLT8 Cyl 6.0 L GAS
    2007 GMC Sierra 1500 HD ClassicSLE, SLT8 Cyl 6.0 L GAS
    2001-2004 GMC Sierra 2500Base, SL, SLE, SLT, WT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    2001-2007 GMC Sierra 2500 HDBase, SL, SLE, SLT, WT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19366700 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19366700 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How should the brake hose be positioned during installation for the 2006 Chevrolet Silverado 1500? Posted by Customer
    A:
    Ensure the hose is not twisted or in contact with any suspension component, then install the brake hose into the bracket with the vehicle's weight on the suspension.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How do you secure the junction block after installing the rear brake hose for the 2005 Chevrolet Silverado 1500? Posted by Customer
    A:
    Install the junction block retaining bolt to the axle and tighten it to 22 Nm (16 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the first step in replacing a brake pipe for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Begin by disconnecting the brake pipe fittings, removing the brake pipe fasteners, and taking out the brake pipe from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the torque specification for tightening the brake hose to caliper bolt for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Tighten the bolt to 40 Nm (30 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How do you prepare the new brake pipe for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Select the appropriate size of brake pipe and tube nuts, strip the nylon coating from the end to be flared with the coating stripping tool included in the J 45405, ensuring not to gouge the metal surface.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What are the final steps after connecting the brake pipe fitting for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    Bleed the hydraulic brake system, reinstall the tire and wheel assembly, check that the hose does not contact any suspension or wheel parts during extreme turns, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the first step in replacing a brake pipe for the 2006 GMC Sierra 3500? Posted by Customer
    A:
    Begin by disconnecting the brake pipe fittings, removing the brake pipe fasteners, and taking out the brake pipe from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done after securing the brake pipe fasteners for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    Connect the brake pipe fittings, tightening them to the Brake Pressure Modulator Valve (BPMV) or the wheel jounce hoses to 25 Nm (18 ft. lbs.) and to the master cylinder to the same torque specification.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What components need to be removed after disconnecting the brake pipe fitting for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Remove the brake hose retaining clip from the hose mounting bracket, followed by the brake hose bolt and bracket from the upper control arm, and then from the steering knuckle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How do you disconnect the brake pipe fitting from the brake hose for the 2006 GMC Sierra 3500? Posted by Customer
    A:
    Use a backup wrench on the hose fitting end to disconnect the brake pipe fitting from the brake hose and cap the fitting end.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done after reinstalling the brake hose retaining clip for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Remove the rubber cap or plug from the brake pipe fitting end, and connect the brake pipe fitting nut to the brake hose using a backup wrench, ensuring not to bend the bracket or pipe, and tighten to 25 Nm (18 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done to prevent fluid loss and contamination for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Clean all dirt from the brake hose and brake pipe fittings, and install a rubber cap or plug on the exposed brake pipe fitting ends.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the next step after removing the brake hose retaining clip for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Take out the jounce hose from the bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Flex Hose, Rear Driver Side 19366700 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19366700 Flex Hose, Rear Driver Side is available in the market under the name GM Brake Line, Hydraulic Hose. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19366700 Flex Hose, Rear Driver Side fits certain Chevrolet Silverado 1500, Silverado 1500 Classic, Silverado 1500 HD models, as well as GMC Sierra 1500, Sierra 2500 HD, Sierra 2500 models.
The original GM component designated by manufacturer part number 19366700 maintains top performance when functioning as the Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line unit at its Rear Driver Side. The component 19366700 is constructed from durable material and its dimensions span 4.1 x 2.1 x 19.1 inches while weighing 0.80 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Hose, Hydraulic Brake. The part 19366700 has available replacement options listed under 19540524 or 15102333, 15075746, 15748046, 21999528, 22163613, 15884702. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.