Make sure this part fits

GM 26058832
Axle Shaft, Front Passenger Side

1998-2006 GM

Customer Questions & Expert Answers (14)
GM 26058832 Axle Shaft, Front Passenger Side
  • Part Description
    Shaft, Front Axle
  • Position
    Front Passenger Side
  • Replaces
    26059713
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2004, 1999-2000 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
    2003-2005 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2005 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2005 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2005 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    1998-1999 Chevrolet C1500Cheyenne, LS, Silverado, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    1998-1999 Chevrolet C1500 SuburbanBase, LS, LT8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    1998-1999 Chevrolet C2500 SuburbanBase, LS8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1998-1999 Chevrolet K1500Cheyenne, LS, Silverado, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    1998-1999 Chevrolet K1500 SuburbanBase, LS, LT8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 26058832 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 26058832 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What are the final steps after installing the axle shaft for the 2005 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Reinstall the tire and wheel assembly, inspect and add axle lubricant to the axle housing if necessary, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How can you prevent the drive axle wheel drive shaft from turning for the 2005 Cadillac Escalade EXT? Posted by Customer
    A:
    Insert a drift or a large screwdriver through the brake caliper into one of the brake rotor vanes.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you inspect on the axle shaft for the 2000 Chevrolet K3500? Posted by Customer
    A:
    Inspect the shaft for any bends and check the shaft spline for chips, burrs, cracking, or excessive wear.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What components need to be removed from the stabilizer link for the 2000 Chevrolet K3500? Posted by Customer
    A:
    Remove the stabilizer link nut, bolt, and spacer assembly (8050 GVW and above).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the torque specification for the new pinion shaft locking bolt for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Tighten it to 36 Nm (27 ft. lbs.) for the 8.6 inch axle or 50 Nm (37 ft. lbs.) for the 9.5 inch axle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the first step to replace the rear axle shaft on a 9.75 Inch Axle for the 2004 Chevrolet Tahoe? Posted by Customer
    A:
    Release the park brake and raise the vehicle, ensuring to follow proper vehicle lifting precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you install the new seal for the 2000 Cadillac Escalade? Posted by Customer
    A:
    Use either the J36600 Seal Installer (K2 Models) or J22833 Seal Installer (K3 Models) to install the new seal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How should the axle flange bolts be installed for the 2003 Chevrolet Suburban 1500? Posted by Customer
    A:
    Install the axle flange bolts and tighten them to 156 Nm (115 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be removed after raising for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be removed after raising for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    Remove the tire and wheel assembly, followed by the rear steering gear assembly and the steering knuckle assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done after aligning the pinion shaft for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Install the new pinion shaft locking bolt, tightening it to 36 Nm (27 ft. lbs.) for the 8.6 inch axle or 50 Nm (37 ft. lbs.) for the 9.5/9.6LD inch axle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done with the nut and washer from the hub for the 2004 GMC Yukon? Posted by Customer
    A:
    Remove the nut and washer, ensuring not to reuse the nut, as a new one must be used for installation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you do if the axle shaft is difficult to remove for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Utilize the Axle Remover (J 45859) and Slide Hammer (J 2619-01).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Axle Shaft, Front Passenger Side 26058832 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 26058832 Axle Shaft, Front Passenger Side is available in the market under the name GM Axle Shaft. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 26058832 Axle Shaft, Front Passenger Side fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 26058832 maintains top performance when functioning as the Shaft, Front Axle unit at its Front Passenger Side. The component 26058832 is constructed from durable material and its dimensions span 17.0 x 6.6 x 6.5 inches while weighing 9.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Output Shaft; Inner Shaft; Outer Shaft. The part 26058832 has available replacement options 26059713. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.