Make sure this part fits

GM 26058813
Axle Shaft, Front Driver Side

1998-2013 GM

Customer Questions & Expert Answers (28)
GM 26058813 Axle Shaft, Front Driver Side
  • Part Description
    Shaft, Front Axle
  • Position
    Front Driver Side
  • Replaces
    26059717
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2012, 1999-2000 Cadillac EscaladeBase, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2003-2011 Cadillac Escalade ESVBase, Luxury, Platinum, Premium8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2002-2013 Cadillac Escalade EXTBase, Luxury, Premium8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007-2011 Chevrolet AvalancheLS, LT, LTZ8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    1998-1999 Chevrolet C1500Cheyenne, LS, Silverado, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    1998-1999 Chevrolet C1500 SuburbanBase, LS, LT8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    1998-1999 Chevrolet C2500 SuburbanBase, LS8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1998-1999 Chevrolet K1500Cheyenne, LS, Silverado, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 26058813 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 26058813 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the final step in the process for the 2000 Cadillac Escalade? Posted by Customer
    A:
    Reinstall the differential carrier assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the procedure for axles with a locking differential for the 2007 Cadillac Escalade? Posted by Customer
    A:
    For those with a locking differential, remove the shaft partially and rotate the case until the pinion shaft touches the housing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you secure the pinion shaft for the 2008 Cadillac Escalade? Posted by Customer
    A:
    Align the pinion shaft hole with the differential case bolt hole and install a new pinion shaft locking bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done for axles without a locking differential during installation for the 2008 Cadillac Escalade ESV? Posted by Customer
    A:
    Place the C-lock on the button end of the axle shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done for axles without a locking differential during installation for the 2007 Cadillac Escalade ESV? Posted by Customer
    A:
    Place the lock on the button end of the axle shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you attach the wheel drive shaft inboard flange to the output shaft flange for the 2005 Cadillac Escalade EXT? Posted by Customer
    A:
    Use the inboard flange bolts to attach them.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you begin the removal process of the axle shaft for the 2005 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Use locking pliers to grip the rib on the axle shaft flange and twist it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done to the hub assembly before reinstallation for the 2000 Chevrolet K3500? Posted by Customer
    A:
    Clean off any old RTV or gasket and thoroughly clean the hub assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you secure the inboard C/V joint flange to the companion flange for the 2000 Chevrolet K3500? Posted by Customer
    A:
    Insert the outer C/V joint splined shank into the knuckle hub and secure it with bolts without tightening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What do you do after removing the axle shaft for the 2007 Chevrolet Silverado 1500? Posted by Customer
    A:
    Pull the axle shaft out of the tube and remove the gasket, ensuring to clean the axle shaft flange and the outside face of the hub assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done with the gasket during the removal process for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Remove the gasket and ensure to clean the axle shaft flange and the outside face of the hub assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done after installing the axle flange bolts for the 2008 Chevrolet Silverado 1500? Posted by Customer
    A:
    Inspect and add axle lubricant to the axle housing if necessary, following the appropriate lubricant level inspection procedures for the specific axle size.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the next component to take out after the tire and wheel assembly for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Remove the rear steering gear assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done after removing the tire and wheel for the 2003 Chevrolet Suburban 1500? Posted by Customer
    A:
    Next, remove the flange bolts and lightly tap the axle shaft with a soft-faced hammer to loosen it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you ensure the lock is seated properly in the differential gear for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Pull the shaft flange outward to seat the lock in the differential gear and align the hole in the pinion shaft with the bolt hole in the differential case.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the final step in the process for the 2004 Chevrolet Tahoe? Posted by Customer
    A:
    Lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you remove the lock on the rear axle shaft for the 2010 Chevrolet Silverado 1500? Posted by Customer
    A:
    Use a screwdriver to rotate the lock until it aligns with the thrust block, then push in on the rear axle shaft to remove the lock.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the final step after reinstalling components for the 2010 GMC Yukon? Posted by Customer
    A:
    Install the tire and wheel assembly, fill the rear axle with the proper lubricant, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the next step after removing the brake caliper for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Take off the rear cover and gasket, and remove the pinion shaft locking bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the next step after pulling the wheel drive shaft through the lower control arm opening for the 2004 GMC Yukon? Posted by Customer
    A:
    For installation, wrap shop towels around the boots and ensure the steering knuckle and wheel drive shaft splines and threads are clean and dry.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you do after inserting the axle shaft and gasket for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Align the holes in the axle flange and gasket with those in the hub, and install the axle flange bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done after aligning the holes for the 2008 GMC Sierra 1500? Posted by Customer
    A:
    Install a new pinion shaft locking bolt, tightening it to 34 N.m (25 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done for axles without a locking differential during installation for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Place the lock on the button end of the axle shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the final step after reassembling the components for the 2009 GMC Sierra 1500? Posted by Customer
    A:
    Lower the vehicle and remove the support.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you use to grip the axle shaft flange for the 2008 GMC Sierra 1500? Posted by Customer
    A:
    Use locking pliers to grip the rib on the axle shaft flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the first step in the installation process for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    Begin by installing the axle shaft and then the spring loaded lock clip at the axle shaft end.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the next step after removing the brake components for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Remove the rear cover and gasket, then the pinion shaft locking bolt and the pinion shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Axle Shaft, Front Driver Side 26058813 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 26058813 Axle Shaft, Front Driver Side is available in the market under the name GM Axle Shaft. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 26058813 Axle Shaft, Front Driver Side fits certain Chevrolet Tahoe, Avalanche, Silverado 1500 models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 26058813 maintains top performance when functioning as the Shaft, Front Axle unit at its Front Driver Side. The component 26058813 is constructed from durable material and its dimensions span 8.2 x 7.8 x 10.5 inches while weighing 4.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Output Shaft; Inner Shaft; Outer Shaft. The part 26058813 has available replacement options 26059717. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.