Make sure this part fits

GM 20765200
Shock Absorber

2007-2011 GM

Customer Questions & Expert Answers (10)
GM 20765200 Shock Absorber
GM 20765200 Shock Absorber
  • Part Description
    Absorber, Shock
  • Position
    Front
  • Replaces
    15903323
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2007-2010 Cadillac EscaladeBase, Hybrid, Hybrid Platinum, Platinum8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2009-2010 Cadillac Escalade ESVBase, Platinum8 Cyl 6.2 L FLEX
    2008-2010 Cadillac Escalade EXTBase8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2008-2010 Chevrolet AvalancheLS, LT, LTZ8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2008-2011 Chevrolet Silverado 1500Hybrid, LS, LT, LTZ, WT, XFE6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
    2009-2010 Chevrolet Suburban 1500LS, LT, LTZ8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007-2010 Chevrolet TahoeHybrid, LS, LT, LTZ8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX
    2008-2011 GMC Sierra 1500Denali, Hybrid, SL, SLE, SLT, WT, XFE6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007-2010 GMC YukonDenali, Denali Hybrid, Hybrid, SLE, SLT8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2009-2010 GMC Yukon XL 1500Denali, SLE, SLT8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 20765200 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 20765200 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step in the installation process for the 2008 Cadillac Escalade? Posted by Customer
    A:
    Install the shock absorber.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should be done after removing the upper shock absorber nut and bolt for the 2007 Cadillac Escalade? Posted by Customer
    A:
    Remove the lower shock absorber nut and bolt, and take out the shock absorber.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How do you install the new shock absorber for the 2008 Chevrolet Silverado 1500? Posted by Customer
    A:
    Place the new shock absorber in position and secure it with the upper shock absorber nut and bolt, adhering to the Fastener Notice.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What is the procedure for air leveling for the 2010 Chevrolet Tahoe? Posted by Customer
    A:
    Turn the ignition ON with the engine off, install a scan tool, and exhaust the air from the system for at least 60 seconds.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should be done with the old shock absorber nut for the 2010 Chevrolet Silverado 1500? Posted by Customer
    A:
    Discard the old shock absorber nut and replace it with a new one.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What is the next step after securing the upper shock absorber for the 2009 GMC Sierra 1500? Posted by Customer
    A:
    Install the lower shock absorber nut and bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What is the process for compressing the front spring for the 2009 GMC Sierra 1500? Posted by Customer
    A:
    Compress the front spring using the CH-48845 while holding the shock absorber shaft with the appropriate size wrench.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What is the torque specification for the new shock absorber nut for the 2010 GMC Yukon? Posted by Customer
    A:
    Tighten it to 80 Nm (59 lb ft) for vehicles with electronic suspension, or 60 Nm (44 lb ft) for those without.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should be done after the installation is complete for the 2010 GMC Sierra 1500? Posted by Customer
    A:
    Remove the support from the rear axle, take away the safety stands, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Shock Absorber 20765200 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 20765200 Shock Absorber is available in the market under the name GM Shock Absorber. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 20765200 Shock Absorber fits certain Chevrolet Tahoe, Avalanche, Silverado 1500 models, as well as GMC Sierra 1500, Yukon, Yukon XL 1500. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 20765200 maintains top performance when functioning as the Absorber, Shock unit at its Front. The component 20765200 is constructed from durable material and its dimensions span 6.4 x 6.1 x 26.5 inches while weighing 12.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Shock; Strut; Absorber, Front And Rear Suspension. The part 20765200 has available replacement options 15903323. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.