Make sure this part fits

GM 25880374
Coolant Hose

2008-2013 GM

Customer Questions & Expert Answers (12)
GM 25880374 Coolant Hose
  • Part Description
    Hose, Engine Coolant By-Pass
  • Manufacturer
    General Motors
Make sure this part fits
$41.45 MSRP: $64.93
You Save: $23.48 (37%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2009-2013 Cadillac EscaladeHybrid, Hybrid Platinum8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)
    2009-2013 Chevrolet Silverado 1500Hybrid8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)
    2008-2013 Chevrolet TahoeHybrid8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)
    2009-2013 GMC Sierra 1500Hybrid8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)
    2008-2013 GMC YukonDenali Hybrid, Hybrid8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25880374 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25880374 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the Engine Coolant Air Bleed Pipe (307) without AFM for the 2010 Cadillac Escalade? Posted by Customer
    A:
    Remove the intake manifold if replacing the rear coolant air bleed covers.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What should be done if the rear coolant air bleed covers were replaced for the 2010 Chevrolet Silverado 1500? Posted by Customer
    A:
    Reinstall the intake manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What is the first step in the installation process for the 2009 Chevrolet Silverado 1500? Posted by Customer
    A:
    Place a new gasket onto the water outlet.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What should be done after draining the cooling system for the 2010 Chevrolet Silverado 1500? Posted by Customer
    A:
    Reposition the surge tank inlet hose clamp from the radiator and remove the surge tank inlet hose from the radiator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    How do you begin the installation of the new hose for the 2009 Chevrolet Tahoe? Posted by Customer
    A:
    Start by installing the surge tank inlet hose to the surge tank and positioning the surge tank inlet hose clamp to the surge tank.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What should be done for those without RPO C36 during installation for the 2009 Chevrolet Tahoe? Posted by Customer
    A:
    Do the same as for vehicles with RPO C36, connecting the surge tank outlet hose appropriately.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What is the installation process for the new seals for the 2009 GMC Sierra 1500? Posted by Customer
    A:
    Position the O-ring seal onto the nipple of the pipe, then install the seals onto the coolant air bleed pipe or covers.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What should be done after draining the cooling system for the 2009 GMC Sierra 1500? Posted by Customer
    A:
    Reposition the surge tank inlet hose clamp from the radiator and remove the surge tank inlet hose from the radiator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What should be done after removing the intake manifold for the 2010 GMC Yukon? Posted by Customer
    A:
    Remove the air cleaner outlet duct and drain the cooling system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What if it is equipped with RPO C36 for the 2010 GMC Yukon? Posted by Customer
    A:
    Remove the surge tank/heater outlet hose from the mounting clip as well.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    How should the air cleaner outlet duct clamps be tightened for the 2008 GMC Yukon? Posted by Customer
    A:
    Tighten the air cleaner outlet duct clamps at the throttle body and MAF/IAT sensor to 7 N.m (62 lb in) and fill the cooling system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Coolant Hose 25880374 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25880374 Coolant Hose is available in the market under the name GM Cooling Hose, Coolant Pipe. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25880374 Coolant Hose fits certain Chevrolet Tahoe, Silverado 1500 models, as well as GMC Sierra 1500, Yukon. Additionally, it is compatible with Cadillac Escalade models.
The original GM component designated by manufacturer part number 25880374 maintains top performance when functioning as the Hose, Engine Coolant By-Pass unit. The component 25880374 is constructed from durable material and its dimensions span 20.0 x 10.7 x 6.5 inches while weighing 1.00 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Hose, Engine Coolant By - Pass. The part 25880374 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.