Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 89044625
Handle, Inside

2005-2008 GM

Customer Questions & Expert Answers (9)
GM 89044625 Handle, Inside
GM 89044625 Handle, Inside
GM 89044625 Handle, Inside
GM 89044625 Handle, Inside
  • Part Description
    Handle, Door Lock Remote Control Inside; Interior Door Handle
  • Position
    Front Driver Side
  • Manufacturer
    General Motors
Make sure this part fits
$126.25 MSRP: $188.75
You Save: $62.50 (34%)
Ships in 1-3 Business Days
1
ADD TO CART

  • 89044625 Handle, Inside is Ref No. 4 in the diagram below

    2005 Saturn Relay Handle, Inside Diagram for 89044625
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 89044625

  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2007 Buick TerrazaCX, CXL6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2005-2008 Chevrolet UplanderBase, LS, LT6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2005-2006 Pontiac MontanaSV66 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2005-2007 Saturn Relay1, 2, 36 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is 89044625 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 89044625 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the inner sliding door handle on Buick Terraza? Posted by Customer
    A:
    The first task to replace an inside sliding Door Handle is to disconnect the power sliding door system by removing the psd 15a fuse located in the instrument panel (I/P) fuse block which powers both power sliding door modules (PSDM) at low current logic level. Apply the Door Handle tool (J38742) to remove the inside Door Handle clip after which you can extract the inside handle from the sliding door. Position the inside Door Handle clip with the open end up while inserting it into the handle and then align the handle to the sliding door shaft before pressing down to set the handle. The psd 15a fuse needs to be reinstalled into the i/p fuse block to bring back low current logic power after which both psds become operational but the psdms will need to redo their learning process for complete open and complete closed positions of the psd.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the sliding inner door handle on Chevrolet Uplander? Posted by Customer
    A:
    The first step to replace the sliding door inside handle requires disabling the power sliding door (PSD) system by taking out the PSD 15A fuse from the instrument panel (I/P) fuse block. This operation interrupts low current logic power to both LH and RH power sliding door modules (PSDM). The Sliding Door Handle Clip Remover (J 42506-A) enables the removal of the inside door handle clip before extracting the inside handle from the sliding door. Secure the clip by loading it into the inside door handle which should be placed opposite the door opening then push the handle toward the sliding door shaft. Fitting back the PSD 15A fuse into the I/P fuse block will complete the procedure and force both PSDMs to relearn the complete open and closed positions of the PSD.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step in removing the inside handle from the sliding door for the 2006 Buick Terraza? Posted by Customer
    A:
    Use the Sliding Door Handle Clip Remover to remove the inside door handle clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step in installing the new outside handle for the 2005 Buick Terraza? Posted by Customer
    A:
    Attach the outside handle cable to the new handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step in removing the inside handle from the sliding door for the 2007 Buick Terraza? Posted by Customer
    A:
    Use the Sliding Door Handle Clip Remover to remove the inside door handle clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step in the installation process for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Connect the outside handle cable to the outside handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step in the installation process for the 2005 Chevrolet Uplander? Posted by Customer
    A:
    Replace the upper and lower portions on the lock rods.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What are the next steps after disconnecting the harness connector for the 2006 Chevrolet Uplander? Posted by Customer
    A:
    Remove the sliding door handle screws and the lock assembly from the sliding door, then detach the outside handle cable from the lock assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Handle, Inside 89044625 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 89044625 Handle, Inside is available in the market under the name GM Door Handle. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 89044625 Handle, Inside fits certain Chevrolet Uplander models, as well as Buick Terraza. Additionally, it is compatible with Pontiac Montana and Saturn Relay models.
The original GM component designated by manufacturer part number 89044625 maintains top performance when functioning as the Handle, Door Lock Remote Control Inside; Interior Door Handle unit at its Front Driver Side. The component 89044625 is constructed from durable material and its dimensions span 5.6 x 3.4 x 2.1 inches while weighing 0.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 89044625 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.