Make sure this part fits

GM 10439371
Handle, Outside, Passenger Side

1997-2005 GM

Customer Questions & Expert Answers (12)
GM 10439371 Handle, Outside, Passenger Side
  • Part Description
    Handle, Door Outside Handle; Exterior Door Handle
  • Position
    Passenger Side
  • Replaces
    10286427, 10406574, 10256724, 10281756, 10275183, 10439527, 10275195, 10439543, 10406550, 10439535, 10298985, 10275191, 10403776, 10439529, 10439515, 10256732, 10277103, 10256734, 10275185, 10275189, 10281764, 10295456, 10288254, 10439513, 10256730, 10289474, 10295368, 10281754, 10281762, 10444201, 10439531
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    1997-2003 Buick CenturyCustom, Limited6 Cyl 3.1 L GAS
    1997-2003 Buick Regal25th Anniversary Edition, GS, GSE, LS, LSE6 Cyl 3.8 L GAS
    2004-2005 Chevrolet ClassicBase, LS4 Cyl 2.2 L GAS
    1997-2003 Chevrolet MalibuBase, LS4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS
    1997-1999 Oldsmobile CutlassBase, GL, GLS6 Cyl 3.1 L GAS
    1998-2002 Oldsmobile IntrigueBase, GL, GLS, GX6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
    1997-2003 Pontiac Grand PrixGT, GTP, SE6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 10439371 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10439371 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after installing the new door handle for the 2003 Buick Century? Posted by Customer
    A:
    Install a new door handle rivet and reattach the trim panel before closing the window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should you do after removing the rivet for the 2001 Buick Regal? Posted by Customer
    A:
    Open the handle clip to detach the lock rod and the handle rod from the handle, allowing for the removal of the inside door handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What size drill bit is used to drill out the rivet for the 2001 Buick Regal? Posted by Customer
    A:
    A 6.35 mm (1/4 in) drill bit.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the final step in the installation process for the 2000 Buick Regal? Posted by Customer
    A:
    Install a new rivet, followed by the water deflector and finally the trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the final step in the installation process for the 2002 Buick Regal? Posted by Customer
    A:
    Close the clip cover over the threaded outside door handle rod, then reinstall the water deflector, the energy absorber pad, and finally the trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done with the door outside handle rod for the 2005 Chevrolet Classic? Posted by Customer
    A:
    Push the lower end of the door outside handle rod into the retainer on the door lock actuator and close the retainer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the torque specification for the two rear door lock screws for the 2004 Chevrolet Classic? Posted by Customer
    A:
    The two rear door lock screws should be tightened to 6 N.m (53 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the rear side door outside handle for the 2004 Chevrolet Classic? Posted by Customer
    A:
    Raise the window to the full up position and remove the rear door water deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What do you do after removing the handle from the door for the 2004 Chevrolet Classic? Posted by Customer
    A:
    Connect the inside handle rods to the new front door inside handle and position it to the locking system module.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the procedure for positioning the door outside handle for the 2001 Chevrolet Malibu? Posted by Customer
    A:
    Position the door outside handle in the closed position, pushing the lower end of the door outside handle rod into the retainer on the door lock actuator and closing the retainer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after installing the rivet for the 2000 Chevrolet Malibu? Posted by Customer
    A:
    Reinstall the door water deflector and finally, reinstall the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Handle, Outside, Passenger Side 10439371 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10439371 Handle, Outside, Passenger Side is available in the market under the name GM Door Handle. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10439371 Handle, Outside, Passenger Side fits certain Chevrolet Malibu, Classic models, as well as Buick Regal, Century. Additionally, it is compatible with Pontiac Grand Prix and Oldsmobile Cutlass, Intrigue models.
The original GM component designated by manufacturer part number 10439371 maintains top performance when functioning as the Handle, Door Outside Handle; Exterior Door Handle unit at its Passenger Side. The component 10439371 is constructed from durable material and its dimensions span 4.2 x 4.1 x 15.6 inches while weighing 0.90 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 10439371 has available replacement options 10286427, 10406574, 10256724, 10281756, 10275183, 10439527, 10275195, 10439543, 10406550, 10439535, 10298985, 10275191, 10403776, 10439529, 10439515, 10256732, 10277103, 10256734, 10275185, 10275189, 10281764, 10295456, 10288254, 10439513, 10256730, 10289474, 10295368, 10281754, 10281762, 10444201, 10439531. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.