Make sure this part fits

GM 19120101
Handle, Outside, Driver Side

2002-2009 GM

Customer Questions & Expert Answers (14)
GM 19120101 Handle, Outside, Driver Side
  • Part Description
    Handle, Door Outside Handle; Exterior Door Handle
  • Position
    Driver Side
  • Replaces
    88937185
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2005 Buick RainierCXL, CXL Plus6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2009 Chevrolet TrailblazerBase, LS, LT, LTZ, North Face, SS6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Trailblazer EXTLS, LT, North Face6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2009 GMC EnvoyDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2006 GMC Envoy XLDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2004-2005 GMC Envoy XUVSLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19120101 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19120101 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the final step after installing the handle for the 2003 Chevrolet Trailblazer? Posted by Customer
    A:
    Reinstall the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step for installation for the 2006 Chevrolet Trailblazer? Posted by Customer
    A:
    First install the bezel to the door, ensuring that all 4 retaining tabs are fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you ensure the handle is properly positioned during installation for the 2004 Chevrolet Trailblazer? Posted by Customer
    A:
    Insert the handle locator tab into the locator cutout and move the handle rearward, ensuring the fastener hole is indexed to the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after removing the door trim panel for the 2009 Chevrolet Trailblazer? Posted by Customer
    A:
    Take out the water deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What do you do with the upper lock rod retainer for the 2008 Chevrolet Trailblazer? Posted by Customer
    A:
    Release the upper lock rod retainer from the rod and remove the lock rod from the handle assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done before installing the door trim panel for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Reattach the rear half of the water deflector to the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the installation process for the handle assembly for the 2009 Chevrolet Trailblazer? Posted by Customer
    A:
    If equipped, install the lock cylinder to the handle, then attach the handle assembly to the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step in the installation process for the 2005 Chevrolet Trailblazer? Posted by Customer
    A:
    Attach the lock cylinder to the handle if applicable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you install the new handle for the 2009 GMC Envoy? Posted by Customer
    A:
    Position the handle to the door and install the rods back to the handle, followed by the rod retainer locks.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you install the new handle for the 2004 GMC Envoy? Posted by Customer
    A:
    Install the handle onto the rear side access door control assembly and press it in until the spring clip retaining the handle is fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after removing the door trim panel and water deflector for the 2008 GMC Envoy? Posted by Customer
    A:
    Release the clip that retains the lock rod to the handle and remove the lock rod.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after attaching the rods to the handle for the 2007 GMC Envoy? Posted by Customer
    A:
    Insert the handle locator tab into the locator cutout and move the handle rearward, ensuring the fastener hole aligns with the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    If equipped, what should be done with the lock cylinder rod retainer for the 2003 GMC Envoy? Posted by Customer
    A:
    Release the lock cylinder rod retainer from the lock rod and remove the lock cylinder rod from the handle assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Handle, Outside, Driver Side 19120101 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19120101 Handle, Outside, Driver Side is available in the market under the name GM Door Handle. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19120101 Handle, Outside, Driver Side fits certain Chevrolet Trailblazer, Trailblazer EXT models, as well as GMC Envoy, Envoy XL, Envoy XUV. Additionally, it is compatible with Buick Rainier and Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 19120101 maintains top performance when functioning as the Handle, Door Outside Handle; Exterior Door Handle unit at its Driver Side. The component 19120101 is constructed from durable material and its dimensions span 9.9 x 6.6 x 3.4 inches while weighing 0.90 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 19120101 has available replacement options 88937185. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.