Make sure this part fits

GM 25791601
Tube

2007-2012 GM

Customer Questions & Expert Answers (15)
GM 25791601 Tube
  • Part Description
    Hose, Air Conditioner Electric Temperature And Motor Control; A/C Refrigerant Liquid Hose; A/C Hose
  • Replaced By
    23172046
  • Manufacturer
    General Motors
Make sure this part fits
$20.39 MSRP: $38.04
You Save: $17.65 (47%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number25791601
    Part DescriptionHose, Air Conditioner Electric Temperature And Motor Control; A/C Refrigerant Liquid Hose; A/C Hose
    Other NamesHose; Hose, A/C Electric Temperature And Motor Control
    Item Dimensions18.5 x 18.1 x 7.7 inches
    Item Weight0.50 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU25791601
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2008-2012 Buick EnclaveBase, CX, CXL6 Cyl 3.6 L GAS
    2009-2012 Chevrolet TraverseLS, LT, LTZ6 Cyl 3.6 L GAS
    2007-2012 GMC AcadiaDenali, SL, SLE, SLT6 Cyl 3.6 L GAS
    2007-2010 Saturn OutlookXE, XR6 Cyl 3.6 L GAS
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25791601 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25791601 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How many places should the heater/A/C tubes retaining nuts be removed from for the 2008 Buick Enclave? Posted by Customer
    A:
    Four places along the frame.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What needs to be disconnected from the A/C pressure switch for the 2010 Buick Enclave? Posted by Customer
    A:
    Disconnect the electrical connector from the A/C pressure switch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What is the final step after reinstalling the fascias for the 2009 Buick Enclave? Posted by Customer
    A:
    Evacuate and recharge the refrigerant system and perform a leak test on the fittings of the component using the Halogen Leak Detector (J 39400-A).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What should be done after securing the tubes and clips for the 2009 Buick Enclave? Posted by Customer
    A:
    Reinstall the right rear inner wheelhouse liner if necessary, lower the vehicle, recharge the refrigerant, and conduct a leak test using the Halogen Leak Detector (J 39400-A).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What is the procedure for connecting the suction hose/pipe to the A/C compressor for the 2008 Buick Enclave? Posted by Customer
    A:
    Connect the suction hose/pipe to the A/C compressor, install the suction hose/pipe bolt to the A/C compressor, and tighten it to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What is the next step after connecting the suction hose/pipe to the TXV tube for the 2010 Chevrolet Traverse? Posted by Customer
    A:
    Connect the suction hose/pipe to the A/C compressor and install the suction hose/pipe bolt, tightening it to 9 Nm (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What is the next step after removing the clamp nuts for the 2009 Chevrolet Traverse? Posted by Customer
    A:
    Remove the liquid line bracket bolt at the right side of the upper tie bar support and take out the liquid line, discarding the discharge line sealing washer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What is the next step after removing the clamp nuts for the 2007 GMC Acadia? Posted by Customer
    A:
    Remove the liquid line bracket bolt at the right side of the upper tie bar support.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What should be done if the right rear inner wheelhouse liner was removed for the 2007 GMC Acadia? Posted by Customer
    A:
    Reinstall it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What is the next step after disconnecting the discharge line from the A/C compressor for the 2009 GMC Acadia? Posted by Customer
    A:
    Remove the discharge line to condenser bolt and disconnect the discharge line from the condenser.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    How should the discharge line be connected after installing new O-rings for the 2007 GMC Acadia? Posted by Customer
    A:
    Connect the discharge line to the condenser and install the discharge line to condenser bolt, tightening it to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What is the next step after connecting the discharge line to the condenser for the 2008 GMC Acadia? Posted by Customer
    A:
    Connect the discharge line to the A/C compressor and install the discharge line bolt to the A/C compressor, also tightening it to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What needs to be disconnected from the A/C pressure switch for the 2010 GMC Acadia? Posted by Customer
    A:
    Disconnect the electrical connector from the A/C pressure switch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What is the next step after installing new O-rings for the 2009 Chevrolet Traverse? Posted by Customer
    A:
    Reinstall the A/C pressure switch, connect the discharge line to the condenser, and install the discharge line to condenser bolt, tightening it to 9 Nm (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 25791601, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 25791601 Tube. It is sometimes referred to as GM A/C Hose. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 25791601 Tube. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery