Make sure this part fits

GM 88957236
Inner CV Joint

2004-2009 GM

Customer Questions & Expert Answers (10)
GM 88957236 Inner CV Joint
  • Part Description
    Joint Kit, Rear Axle Universal Joint; CV Joint
  • Position
    Rear Inner
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2009 Cadillac SRXBase6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
    2005-2009 Cadillac STSBase, Platinum, V6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 88957236 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 88957236 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you assemble the new inner joint seal for the 2005 Cadillac SRX? Posted by Customer
    A:
    Place a new small seal clamp onto the small end of the inner joint seal, slide it into the boot groove, and position it in the inner joint seal groove on the wheel drive shaft bar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What alignment is necessary for the assembly for the 2006 Cadillac SRX? Posted by Customer
    A:
    Align the cage and inner race with the outer race, ensuring the inner race ring groove is positioned down.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    How do you assemble the outer joint for the 2008 Cadillac SRX? Posted by Customer
    A:
    Position the cage with the larger radius corners up, insert the inner race into the cage, and ensure it is fully assembled.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    How much grease should be inserted into the outer joint for the 2009 Cadillac SRX? Posted by Customer
    A:
    Insert approximately 60 percent of the grease from the service kit into the outer joint, spreading it onto the ball tracks, balls, cage, and inner race.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What should be aligned while latching the retaining clamp for the 2006 Cadillac STS? Posted by Customer
    A:
    Align the wheel drive shaft inboard seal, tripot housing, and large seal retaining clamp.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What is the required distance between the seal edges for proper dimension for the 2007 Cadillac SRX? Posted by Customer
    A:
    86.85 mm (3.42 in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What is the required gap and clamping hold time when crimping the small seal retaining clamp for the 2005 Cadillac STS? Posted by Customer
    A:
    A gap of 1 mm (0.039 inch) and a clamping hold time of no less than 2 seconds.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What should be marked before disassembly for the 2007 Cadillac STS? Posted by Customer
    A:
    Mark the tripot spider position on the wheel drive shaft bar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    How do you remove the inner joint from the axle shaft for the 2008 Cadillac STS? Posted by Customer
    A:
    Hold the inner joint housing horizontally, position a brass drift on the inner race, and carefully strike it with a hammer to compress the axle shaft retaining clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Inner CV Joint 88957236 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 88957236 Inner CV Joint is available in the market under the name GM CV Joint. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 88957236 Inner CV Joint fits certain Cadillac SRX, STS models.
The original GM component designated by manufacturer part number 88957236 maintains top performance when functioning as the Joint Kit, Rear Axle Universal Joint; CV Joint unit at its Rear Inner. The component 88957236 is constructed from durable material and its dimensions span 5.1 x 4.5 x 2.4 inches while weighing 0.90 Pounds. The component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Inner Joint Assembly; Outer Joint Assembly. The part 88957236 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.