Make sure this part fits

GM 88957237
Outer CV Joint

2004-2009 GM

Customer Questions & Expert Answers (10)
GM 88957237 Outer CV Joint
  • Part Description
    Joint Kit, Rear Axle Universal Joint; CV Joint
  • Position
    Rear Outer
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number88957237
    Part DescriptionJoint Kit, Rear Axle Universal Joint; CV Joint
    Other NamesInner Joint Assembly; Outer Joint Assembly
    Item Dimensions5.1 x 4.6 x 2.3 inches
    Item Weight0.90 Pounds
    PositionRear Outer
    ConditionNew
    ManufacturerGeneral Motors
    SKU88957237
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2009 Cadillac SRXBase6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
    2005-2009 Cadillac STSBase, V6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is 88957237 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 88957237 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you remove the small seal clamp for the 2005 Cadillac SRX? Posted by Customer
    A:
    Use side cutters to remove and discard the small seal clamp.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What is the final step after crimping the large seal retaining clamp for the 2007 Cadillac SRX? Posted by Customer
    A:
    Inspect the inner joint for smooth operation by rotating the wheel drive shaft 4 or 5 times, and then install the wheel drive shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What is the next step after inserting grease into the inner joint for the 2005 Cadillac STS? Posted by Customer
    A:
    Remove the inner joint from the bench vise, wrap a shop towel around the wheel drive shaft, and place it horizontally in a bench vise.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    How do you remove the tripot spider for the 2007 Cadillac STS? Posted by Customer
    A:
    Carefully tap around the tripot spider face with a brass drift and hammer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What should you do after installing the seal and new retaining ring onto the axle shaft for the 2008 Cadillac SRX? Posted by Customer
    A:
    Engage the inner race splines onto the axle shaft splines, compress the axle shaft retaining ring, and drive the outer joint onto the shaft using a wood block and hammer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    How should the balls be installed for the 2006 Cadillac SRX? Posted by Customer
    A:
    Install the balls sequentially, ensuring no gaps exist between the balls and the inner race ball track.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    How should the tripot spider be installed for the 2006 Cadillac STS? Posted by Customer
    A:
    Install it onto the wheel drive shaft bar, aligning the reference mark if reusing the old tripot spider, ensuring the beveled edge faces the wheel drive shaft bar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    How do you position the large seal retaining clamp for the 2008 Cadillac STS? Posted by Customer
    A:
    Position the large seal retaining clamp onto the seal, and then position the seal and large retaining clamp to the joint outer race.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What should be done after cleaning the grease from the joint for the 2009 Cadillac SRX? Posted by Customer
    A:
    Remove the outer joint from the axle shaft by holding the inner joint housing horizontally and striking it with a hammer to compress the axle shaft retaining clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 88957237, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 88957237 Outer CV Joint. It is sometimes referred to as GM CV Joint. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 88957237 Outer CV Joint. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Cadillac parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery