Make sure this part fits

GM 24505664
Intake Manifold

1996-2004 GM

Customer Questions & Expert Answers (8)
GM 24505664 Intake Manifold
  • Part Description
    Manifold, Engine Fuel Intake Manifold
  • Position
    Upper
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    1997-1999 Buick CenturyCustom, Limited6 Cyl 3.1 L GAS
    1996-2004 Buick RegalCustom, GS, LS, LSE6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
    1996-1998 Buick SkylarkCustom, Gran Sport, Limited, Olympic Gold Edition6 Cyl 3.1 L GAS
    1996-1999 Chevrolet LuminaBase, LS, LTZ6 Cyl 3.1 L GAS
    1997-1999 Chevrolet MalibuBase, LS6 Cyl 3.1 L GAS
    1996-1999 Chevrolet Monte CarloLS6 Cyl 3.1 L GAS
    1996-1998 Oldsmobile AchievaS, SC, SL6 Cyl 3.1 L GAS
    1997-1999 Oldsmobile CutlassBase, GL, GLS6 Cyl 3.1 L GAS
    1996-1997 Oldsmobile Cutlass SupremeBase, SL6 Cyl 3.1 L GAS
    1996-1998 Pontiac Grand AmGT, SE6 Cyl 3.1 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 24505664 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 24505664 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the final step in the process for the 2000 Buick Regal? Posted by Customer
    A:
    Reinstall the supercharger, fill the cooling system, and connect the battery ground (negative) cable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What should be applied to the bolt threads before assembly for the 2001 Buick Regal? Posted by Customer
    A:
    Thread lock compound GM P/N 12345382.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What should be removed if replacing the upper intake manifold for the 2004 Buick Regal? Posted by Customer
    A:
    Remove the throttle body, MAP sensor, Positive Crankcase Ventilation (PCV) valve, and vacuum source manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    If replacing the manifold, what else needs to be removed for the 2001 Buick Regal? Posted by Customer
    A:
    Remove the water outlet housing bolt and stud, the housing, gasket, and thermostat, as well as the ECT sensor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What is the installation process for the new manifold for the 2002 Buick Regal? Posted by Customer
    A:
    Install the vacuum source manifold, PCV valve, MAP sensor, and throttle body if the manifold was replaced.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What is the final step in the process for the 2002 Buick Regal? Posted by Customer
    A:
    Install the radiator inlet hose to the water outlet housing, attach the EGR outlet pipe to the lower intake manifold, tightening the bolt to 29 Nm (21 ft. lbs.), and finally reinstall the drive belt tensioner, generator brace, and upper intake manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What should be done after installing the lower intake manifold for the 2003 Buick Regal? Posted by Customer
    A:
    Reconnect the ECT sensor electrical connector and install the EGR outlet pipe and its bolt, tightening it to 29 Nm (21 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Intake Manifold 24505664 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 24505664 Intake Manifold is available in the market under the name GM Intake Manifold. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 24505664 Intake Manifold fits certain Chevrolet Malibu, Lumina, Monte Carlo models, as well as Buick Regal, Skylark, Century. Additionally, it is compatible with Pontiac Grand Prix, Grand Am and Oldsmobile Cutlass, Achieva, Cutlass Supreme models.
The original GM component designated by manufacturer part number 24505664 maintains top performance when functioning as the Manifold, Engine Fuel Intake Manifold unit at its Upper. The component 24505664 is constructed from durable material and its dimensions span 20.0 x 12.8 x 5.6 inches while weighing 7.10 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 24505664 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.