Make sure this part fits

GM 25973862
Transmission Mount

2005-2011 GM

Customer Questions & Expert Answers (14)
GM 25973862 Transmission Mount
GM 25973862 Transmission Mount
  • Part Description
    Mount, Transmission Mounting; Transfer Case Mount
  • Position
    Front
  • Replaces
    22693266
  • Manufacturer
    General Motors
Make sure this part fits
$63.69 MSRP: $99.78
You Save: $36.09 (37%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number25973862
    Part DescriptionMount, Transmission Mounting; Transfer Case Mount
    Other NamesFront Trans Mount
    Item Dimensions9.3 x 8.1 x 6.3 inches
    Item Weight2.30 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces22693266
    ManufacturerGeneral Motors
    SKU25973862
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2010 Chevrolet CobaltBase, LS, LT, LTZ, Sport, SS4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
    2006-2011 Chevrolet HHRLS, LS Panel, LT, LT Panel, SS4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
    2007-2009 Pontiac G5Base, GT4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
    2005-2007 Saturn Ion1, 2, 34 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25973862 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25973862 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the torque specification for the front transaxle mount and transaxle bolts for the 2008 Chevrolet HHR? Posted by Customer
    A:
    Tighten them to 50 N.m (37 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the final step after installing the transmission mount for the 2009 Chevrolet Cobalt? Posted by Customer
    A:
    Reinstall the underhood electrical center bracket and position the electrical center on the bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What should be removed after raising for the 2005 Chevrolet Cobalt? Posted by Customer
    A:
    Remove the front transaxle mount thru bolt and the bolts connecting the front transaxle mount to the transaxle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the final step after completing the installation for the 2008 Chevrolet Cobalt? Posted by Customer
    A:
    Lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the torque specification for tightening the engine mount to bracket bolts for the 2009 Chevrolet Cobalt? Posted by Customer
    A:
    50 Nm (37 lb ft) in the same sequence.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the next step after removing the bolts for the 2006 Chevrolet Cobalt? Posted by Customer
    A:
    Take out the rear transaxle mount.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the next step after removing the bolts for the 2007 Chevrolet Cobalt? Posted by Customer
    A:
    Slowly lower the transmission with the floor jack to remove the transmission mount from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the first step to replace the left side transmission mount for the 2010 Chevrolet Cobalt? Posted by Customer
    A:
    Disconnect the negative battery cable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    How should the rear transaxle mount be installed for the 2007 Chevrolet HHR? Posted by Customer
    A:
    Begin by hand tightening the rear transaxle mount to frame bolts, then install the rear transaxle mount, heat shield, and the thru bolt to the transmission bracket, also hand tightening the bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the final step after shaking the powertrain for the 2010 Chevrolet HHR? Posted by Customer
    A:
    Raise the vehicle again and tighten the rear transaxle mount through bolt to 100 Nm (74 lb ft), then tighten the front transaxle mount through bolt to 100 Nm (74 lb ft) before lowering the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the order and torque specification for tightening the transmission mount through bolts for the 2006 Chevrolet HHR? Posted by Customer
    A:
    Tighten the rear bolt to 100 Nm (74 ft. lbs.) first, and then the front bolt to 100 Nm (74 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    In what sequence should the transmission mount to transmission bolts be hand started for the 2009 Chevrolet HHR? Posted by Customer
    A:
    Rear bolt, middle bolt, front bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the next step after tightening the bolts for the 2008 Chevrolet HHR? Posted by Customer
    A:
    Remove the floor jacks from under the oil pan, shake the powertrain vigorously from front to rear, and allow it to settle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 25973862, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 25973862 Transmission Mount. It is sometimes referred to as GM Motor And Transmission Mount. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 25973862 Transmission Mount. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery