Make sure this part fits

GM 15835313
Transmission Mount, Black; Blue

2005-2011 GM

Customer Questions & Expert Answers (14)
GM 15835313 Transmission Mount, Black; Blue
  • Part Description
    Mount, Transmission Mounting; Engine Mount Torque Strut; Engine Mount Bracket; Transfer Case Mount; Motor Mount
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number15835313
    Part DescriptionMount, Transmission Mounting; Engine Mount Torque Strut; Engine Mount Bracket; Transfer Case Mount; Motor Mount
    Other NamesUpper Trans Mount; Mount
    Item Dimensions8.1 x 6.3 x 10.1 inches
    Item Weight4.10 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU15835313
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2010 Chevrolet CobaltBase, LS, LT, LTZ, Sport, SS4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
    2006-2011 Chevrolet HHRLS, LS Panel, LT, LT Panel, SS, SS Panel4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
    2007-2009 Pontiac G5Base, GT4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
    2005-2007 Saturn Ion1, 2, 34 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 15835313 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15835313 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after disconnecting the engine control module and positive battery cables for the 2010 Chevrolet Cobalt? Posted by Customer
    A:
    Disconnect the surge tank inlet hose from the surge tank, then remove the under hood electrical center tray bracket nuts and bolt, and disconnect the wiring harness retainer from the tray bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the torque specification for tightening the transmission mount to bracket bolts for the 2007 Chevrolet Cobalt? Posted by Customer
    A:
    Tighten these bolts to 50 N.m (37 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What should be removed after raising for the 2005 Chevrolet Cobalt? Posted by Customer
    A:
    Remove the front transaxle mount thru bolt and the bolts connecting the front transaxle mount to the transaxle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the next step after loosening the bolts for the 2009 Chevrolet Cobalt? Posted by Customer
    A:
    Reposition both floor jacks to create a 1/8 inch gap between the mount and bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What should be removed after raising for the 2006 Chevrolet Cobalt? Posted by Customer
    A:
    The rear transaxle mount through bolt and heat shield, followed by the rear transaxle mount to frame bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the first step in the installation process for the 2009 Chevrolet Cobalt? Posted by Customer
    A:
    Install the transmission mount to the mid-rail, ensuring to tighten the mid-rail bolts to 27 Nm (20 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    How do you install the rear transaxle mount for the 2006 Chevrolet HHR? Posted by Customer
    A:
    Position the rear transaxle mount and heat shield, hand starting the bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What should be removed after supporting the transaxle for the 2007 Chevrolet HHR? Posted by Customer
    A:
    Remove the rear transaxle mount thru bolt and heat shield, followed by the rear transaxle mount to frame bolts, and then take out the rear transaxle mount.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the final step after shaking the powertrain for the 2010 Chevrolet HHR? Posted by Customer
    A:
    Raise the vehicle again and tighten the rear transaxle mount through bolt to 100 Nm (74 lb ft), then tighten the front transaxle mount through bolt to 100 Nm (74 lb ft) before lowering the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    In what order should the transaxle mount through bolts be tightened for the 2008 Chevrolet HHR? Posted by Customer
    A:
    First, tighten the rear bolt to 100 N.m (74 lb ft), then tighten the front bolt to 100 N.m (74 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the first step to balance the engine and transmission mounts for the 2008 Chevrolet HHR? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the torque specification for the positive cable nut for the 2009 Chevrolet HHR? Posted by Customer
    A:
    Tighten the positive cable nut to 15 Nm (11 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What should be done with the front trans mount through bolt for the 2008 Chevrolet Cobalt? Posted by Customer
    A:
    Loosen the front trans mount through bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 15835313, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 15835313 Transmission Mount, Black; Blue. It is sometimes referred to as GM Motor And Transmission Mount. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 15835313 Transmission Mount, Black; Blue. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery