GM 89022624
Lap & Shoulder Belt

The GM parts catalog contains the exclusive list of seat belt components that must be used because multiple manufacturers supply seat belts. You must check correct installation by fully inserting the seat belt latch into the buckle as well as confirming the retention until you release it manually. Start work by detaching the center front seat belt latch bolt as well as the seat belt latch assembly from the car before removing the center front seat belt buckle bolt and the buckle assembly from the seat. The seat belt buckle assembly requires installation on the center front seat by using the buckle bolt which should be tightened to 53 N.m (39 lb ft). The seat belt latch assembly requires installation onto the center front seat before finalizing the procedure with a torque of 53 N.m (39 lb ft).

The first step in center front seat belt replacement is to remove the center front seat belt latch bolt followed by detaching the seat belt latch assembly from the vehicle. You need to extract the center front seat belt buckle bolt before taking out the buckle assembly from the seat. The first step for installation involves connecting the seat belt buckle assembly to the center front seat according to the Fastener Notice provided in Service Precautions before tightening the seat belt buckle bolt to 53 N.m (39 lb ft). Follow by mounting the seat belt latch assembly to the center front seat and fasten it with the seat belt latch bolt that requires a torque of 53 N.m (30 lb ft).

The GM parts catalog specifies which belt components should be used when replacing the center rear seat belt to avoid personal harm. Start the procedure by taking away the seat belt guide cover combined with the rear seat armrest before unfastening the J-Clip situated below the center armrest. You must uninstall the nut from the seat belt retractor followed by the removal of a bolt from the seat belt anchor. The installation process requires torquing the bolt at the seat belt anchor to 52 N.m (38 lb ft) and the nut at the seat belt retractor to match this specification. Reinstall the J-Clip under each area starting with the center armrest then the rear seat armrest before completing with the seat belt guide cover. The seat belt latch should be placed completely inside its buckle before release can be made intentional.

Only Parts listed in GM's component catalog should be used for center front seat belt replacement work to avoid personal injury. Start by unwiring the center front seat belt ladder bolt then disconnect the seat belt latch assembly from the automobile body. Remove the buckle assembly from the seat by taking out the center front seat belt buckle bolt. The installation requires attaching the seat belt buckle assembly to the center front seat before fastening it with the buckle bolt and tightening it to 53 N.m (39 lb ft). Screw the center front seat belt latch assembly onto the seat while using the latch bolt and tighten it to 53 N.m (39 lb ft). Make sure the belt latch securely fits into its buckle position before users can deliberately end the retention.

The first step in center front seat belt replacement is to remove the center front seat belt latch bolt followed by detaching the seat belt latch assembly from the vehicle. You need to extract the center front seat belt buckle bolt before taking out the buckle assembly from the seat. The first step for installation involves connecting the seat belt buckle assembly to the center front seat according to the Fastener Notice provided in Service Precautions before tightening the seat belt buckle bolt to 53 N.m (39 lb ft). Follow by mounting the seat belt latch assembly to the center front seat and fasten it with the seat belt latch bolt that requires a torque of 53 N.m (30 lb ft).

Install the bolt to the seat belt anchor, tightening it to 52 N.m (38 lb ft).

Install the seat belt latch assembly to the center front seat and secure it by tightening the seat belt latch bolt to 53 N.m (39 lb ft).