Make sure this part fits

GM 15160714
Front Seal

2002-2009 GM

Customer Questions & Expert Answers (23)
GM 15160714 Front Seal
  • Part Description
    Seal, Hood Panel
  • Position
    Front
  • Manufacturer
    General Motors
Make sure this part fits
$14.58 MSRP: $16.99
You Save: $2.41 (15%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Buick RainierCXL, CXL Plus6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2009 Chevrolet TrailblazerBase, LS, LT, LTZ, North Face, SS6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Trailblazer EXTLS, LT, North Face6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2009 GMC EnvoyDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2006 GMC Envoy XLDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2004-2005 GMC Envoy XUVSLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15160714 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15160714 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the tailgate weatherstrip for the 2004 Buick Rainier? Posted by Customer
    A:
    Open the end gate and the moveable roof.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you detach the mid gate weatherstrip for the 2004 Buick Rainier? Posted by Customer
    A:
    Detach the mid gate weatherstrip from the pinch-weld flange and window channel, and remove it from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the new weatherstrip for the 2007 Buick Rainier? Posted by Customer
    A:
    Carefully place the new weatherstrip onto the perimeter of the sunroof window, ensuring it is fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you remove the sealing strip for the 2006 Buick Rainier? Posted by Customer
    A:
    Lift upward on the rear edge of the sealing strip and remove it from the pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you align the weatherstrip during installation for the 2005 Buick Rainier? Posted by Customer
    A:
    Align the paint dots on the weatherstrip with the sheet metal joints of the window channel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    Is there any additional step that may be necessary to complete the installation for the 2003 Chevrolet Trailblazer? Posted by Customer
    A:
    Yes, spooning of the weatherstrip may be necessary to complete the installation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the new seal for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Install it onto the inlet grille panel studs.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    Where do you begin the installation of the new weatherstrip for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Begin at the top center of the liftgate opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the torque specification for tightening the screws for the 2009 Chevrolet Trailblazer? Posted by Customer
    A:
    Tighten them to 2 Nm (18 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the new sunroof window weatherstrip for the 2008 Chevrolet Trailblazer? Posted by Customer
    A:
    Carefully place the new sunroof window weatherstrip onto the perimeter of the sunroof window, ensuring it is fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to service the rear door window glass weatherstrip for the 2002 GMC Envoy? Posted by Customer
    A:
    Remove the screw (1.2 N.m (10 lb in)) that retains the sealing strip to the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after removing the front door sill plate for the 2007 GMC Envoy? Posted by Customer
    A:
    Take off the weatherstrip from the pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the rear hood weatherstrip seal for the 2004 Chevrolet Trailblazer? Posted by Customer
    A:
    Open the hood and remove the rear hood seal from the air inlet grille panel studs.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the rear door weatherstrip for the 2005 Chevrolet Trailblazer? Posted by Customer
    A:
    Remove the rear door sill plate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step in the process for the 2006 Chevrolet Trailblazer? Posted by Customer
    A:
    Reinstall the push pin retainers to the front door sealing weatherstrip at the base of the pillar and close the doors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should you position the weatherstrip during installation for the 2006 GMC Envoy? Posted by Customer
    A:
    Position the weatherstrip to the pinch-weld flange and work down both the right and left sides towards the bottom center, ensuring not to stretch the weatherstrip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you secure the weatherstrip during installation for the 2005 GMC Envoy? Posted by Customer
    A:
    Secure the weatherstrip to the endgate opening flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the order of reinstallation after the weatherstrip is in place for the 2004 GMC Envoy? Posted by Customer
    A:
    Reinstall the front door window, followed by the front window outer belt sealing strip, the front door water deflector, and finally, the front door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the liftgate weatherstrip for the 2009 GMC Envoy? Posted by Customer
    A:
    Open the liftgate and pull the weatherstrip from the liftgate opening pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the auxiliary rear door weatherstrip for the 2003 GMC Envoy? Posted by Customer
    A:
    Open the side doors on either the right or left side.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after removing the upper molded detail for the 2004 GMC Envoy? Posted by Customer
    A:
    Remove the lower molded detail from the front of the side access door using the same tool to release the one integral retaining pin.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after opening the doors for the 2008 GMC Envoy? Posted by Customer
    A:
    Remove the push pin retainers from the front door sealing weatherstrip at the base of the pillar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Front Seal 15160714 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15160714 Front Seal is available in the market under the name GM Weather Strip. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15160714 Front Seal fits certain Chevrolet Trailblazer, Trailblazer EXT models, as well as GMC Envoy, Envoy XL, Envoy XUV. Additionally, it is compatible with Buick Rainier and Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 15160714 maintains top performance when functioning as the Seal, Hood Panel unit at its Front. The component 15160714 is constructed from durable material and its dimensions span 39.6 x 4.2 x 4.1 inches while weighing 1.10 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Seal, Radiator Support Mounting. The part 15160714 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.