Make sure this part fits

GM 25864094
Belt Weatherstrip, Front Outer Passenger Side

2002-2009 GM

Customer Questions & Expert Answers (23)
GM 25864094 Belt Weatherstrip, Front Outer Passenger Side
  • Part Description
    Sealing Strip Assembly-Front Side Door Window Outer
  • Position
    Front Outer Passenger Side
  • Replaces
    15078776, 15129773, 15089912, 15155103, 15176783, 15946953, 25808853
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number25864094
    Part DescriptionSealing Strip Assembly-Front Side Door Window Outer
    Other NamesSealing Strip, Side Door Window Glass
    Item Dimensions47.9 x 3.3 x 3.3 inches
    Item Weight0.90 Pounds
    PositionFront Outer Passenger Side
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces15078776, 15129773, 15089912, 15155103, 15176783, 15946953, 25808853
    ManufacturerGeneral Motors
    SKU25864094
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Buick RainierCXL, CXL Plus6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2009 Chevrolet TrailblazerBase, LS, LT, LTZ, North Face, SS6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Trailblazer EXTLS, LT, North Face6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2009 GMC EnvoyDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2006 GMC Envoy XLDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2004-2005 GMC Envoy XUVSLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25864094 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25864094 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the sunroof window weatherstrip for the 2007 Buick Rainier? Posted by Customer
    A:
    First, remove the sunroof window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step for installation of the new sealing strip for the 2006 Buick Rainier? Posted by Customer
    A:
    Position the new sealing strip onto the pinch-weld flange, starting at the forward edge of the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you align the weatherstrip during installation for the 2005 Buick Rainier? Posted by Customer
    A:
    Align the paint dots on the weatherstrip with the sheet metal joints of the window channel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you ensure the weatherstrip fits properly for the 2004 Buick Rainier? Posted by Customer
    A:
    Press the weatherstrip onto the lower pinch-weld flange, ensuring it fits around the lower mid gate opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step after installing the weatherstrip for the 2003 Chevrolet Trailblazer? Posted by Customer
    A:
    Close the liftgate window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after detaching the lower molds for the 2004 Buick Rainier? Posted by Customer
    A:
    Detach the weatherstrip from the end gate opening flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the auxiliary front door weatherstrip for the 2006 Chevrolet Trailblazer? Posted by Customer
    A:
    Open the side doors on either the right or left side.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should you position the weatherstrip during installation for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Position the weatherstrip to the pinch-weld flange and work down both sides towards the bottom center, ensuring not to stretch the weatherstrip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after exposing the screws for the 2009 Chevrolet Trailblazer? Posted by Customer
    A:
    Remove the screws and take out the weatherstrip side retainer from the windshield pillar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after removing the rear hood seal for the 2004 Chevrolet Trailblazer? Posted by Customer
    A:
    Take the seal off the air inlet grille panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the auxiliary rear door weatherstrip for the 2003 GMC Envoy? Posted by Customer
    A:
    Open the side doors on either the right or left side.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    Where should the bond joint be positioned during installation for the 2005 Chevrolet Trailblazer? Posted by Customer
    A:
    The bond joint should be at the lower center of the door opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step in the installation process for the 2004 GMC Envoy? Posted by Customer
    A:
    Position the new front door window weatherstrip in place.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the sunroof window weatherstrip for the 2008 Chevrolet Trailblazer? Posted by Customer
    A:
    First, remove the sunroof window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after removing the rear hood seal for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Take the seal off the inlet grille panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step after completing the installation for the 2005 GMC Envoy? Posted by Customer
    A:
    Close the moveable roof and the endgate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    Where should the butt joint seam be installed for the 2006 GMC Envoy? Posted by Customer
    A:
    Install the butt joint seam at the center of the bottom pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after opening the doors for the 2008 GMC Envoy? Posted by Customer
    A:
    Remove the push pin retainers from the front door sealing weatherstrip at the base of the pillar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you remove the upper molded detail from the front of the side access door for the 2004 GMC Envoy? Posted by Customer
    A:
    Insert the Door Trim Pad Clip Remover (J 38778) under the weatherstrip mold and release the three integral retaining pins on the mold to the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to service the rear door window glass weatherstrip for the 2002 GMC Envoy? Posted by Customer
    A:
    Remove the screw (1.2 N.m (10 lb in)) that retains the sealing strip to the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the liftgate weatherstrip for the 2009 GMC Envoy? Posted by Customer
    A:
    Open the liftgate and pull the weatherstrip from the liftgate opening pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the front door opening weatherstrip on a Crew Cab for the 2007 GMC Envoy? Posted by Customer
    A:
    Remove the front door sill plate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 25864094, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 25864094 Belt Weatherstrip, Front Outer Passenger Side. It is sometimes referred to as GM Weather Strip. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 25864094 Belt Weatherstrip, Front Outer Passenger Side. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery