Make sure this part fits

GM 15138387
Belt Weatherstrip, Front

2000-2007 GM

Customer Questions & Expert Answers (18)
GM 15138387 Belt Weatherstrip, Front
GM 15138387 Belt Weatherstrip, Front
  • Part Description
    Sealing Strip, Front Door Window Channel; Weatherstrip; Door Seal
  • Position
    Front
  • Replaces
    15196235
  • Manufacturer
    General Motors
Make sure this part fits
$60.36 MSRP: $89.83
You Save: $29.47 (33%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2005-2006 Chevrolet Silverado 1500Hybrid8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV)
    2007 Chevrolet Silverado 1500 ClassicHybrid8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV)
    2003-2006 Chevrolet Suburban 1500Base, LS, LT, LTZ, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Chevrolet Suburban 2500LS, LT8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
    2000-2006 Chevrolet TahoeBase, LS, LT, Z718 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2005-2006 GMC Sierra 1500Hybrid8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV)
    2007 GMC Sierra 1500 ClassicHybrid8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV)
    2000-2006 GMC YukonDenali, SL, SLE, SLT8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15138387 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15138387 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the torque specification for tightening the bolts for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Tighten them to 6 N.m (53 lb in) as per the Fastener Notice in Service Precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the minimum temperature required for the weatherstrip installation for the 2002 Cadillac Escalade? Posted by Customer
    A:
    Ensure the weatherstrip is at a minimum of 21°C (70°F) before starting.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What are the final steps after installing the new sealing strip for the 2002 Cadillac Escalade? Posted by Customer
    A:
    Reinstall the outside mirror and raise the window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you start removing the weatherstrip for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Begin removing the weatherstrip from one end of the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step in the process for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Close the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you begin the installation of the new weatherstrip for the 2003 Chevrolet Suburban 1500? Posted by Customer
    A:
    Begin the installation by peeling off the backing paper and pressing the retainers into place before closing the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What are the final steps after installing the weatherstrip for the 2005 Chevrolet Silverado 1500? Posted by Customer
    A:
    Reinstall the window, the water deflector, and the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you remove the weatherstrip from the liftgate for the 2002 Chevrolet Tahoe? Posted by Customer
    A:
    Open the liftgate and remove the weatherstrip molding from the pinch-weld flange by firmly gripping it and carefully pulling it out and away from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the rear door weatherstrip for the 2006 Chevrolet Tahoe? Posted by Customer
    A:
    Open the door and remove the weatherstrip from the mounting surface.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you check after completing the installation for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Check the door closing effort and ensure a proper seal to the door fit.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you remove the liftgate weatherstrip for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Open the liftgate and remove the weatherstrip molding from the pinch-weld flange by firmly gripping it and carefully pulling it out and away from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step after installing the new sealing strip for the 2006 Chevrolet Tahoe? Posted by Customer
    A:
    Raise the window again.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after removing the old rear hood seal for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Next, align the slot in the rear hood seal with the cowl pinch-weld flange and press it into place.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done with the bolts during installation for the 2006 GMC Yukon? Posted by Customer
    A:
    Ensure to install the bolts and tighten them to 6 N.m (53 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you remove the weatherstrip for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Take off the weatherstrip from the rear side door pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be removed after the door trim panel for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Remove the water deflector and the window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after removing the trim panels for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Take out the weatherstrip from the door opening flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Belt Weatherstrip, Front 15138387 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15138387 Belt Weatherstrip, Front is available in the market under the name GM Weather Strip. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15138387 Belt Weatherstrip, Front fits certain Chevrolet Tahoe, Silverado 1500, Suburban 1500 models, as well as GMC Sierra 1500, Yukon, Yukon XL 1500. Additionally, it is compatible with Cadillac Escalade, Escalade ESV models.
The original GM component designated by manufacturer part number 15138387 maintains top performance when functioning as the Sealing Strip, Front Door Window Channel; Weatherstrip; Door Seal unit at its Front. The component 15138387 is constructed from durable material and its dimensions span 4.2 x 36.0 x 2.3 inches while weighing 0.80 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Sealing Strip, Side Door Window Glass. The part 15138387 has available replacement options 15196235. Each vehicle needs 2 units of the part marked as SKU 15138387. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.