Make sure this part fits

GM 19132816
Vehicle Speed Sensor

2003-2004 GM

Customer Questions & Expert Answers (15)
GM 19132816 Vehicle Speed Sensor
  • Part Description
    Sensor, Speedometer Drive; Speed Sensor
  • Replaces
    25340482
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2004 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2004 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2003-2004 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2003-2004 Chevrolet Avalanche 1500Base, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L GAS
    2003-2004 Chevrolet Avalanche 2500Base8 Cyl 8.1 L GAS
    2003-2004 Chevrolet Silverado 1500Base, LS, LT, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003 Chevrolet Silverado 1500 HDLS, LT8 Cyl 6.0 L GAS
    2003-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 6.0 L GAS
    2003-2004 Chevrolet Silverado 2500 HDBase, LS, LT, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2003-2004 Chevrolet Silverado 3500Base, LS, LT, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19132816 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19132816 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the Output Shaft Speed Sensor for the 2003 Cadillac Escalade? Posted by Customer
    A:
    First, raise and suitably support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    How do you install the new right rear speed sensor for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Install the right rear speed sensor and tighten it to 15 Nm (11 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the first step to replace the Output Shaft Speed Sensor for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Raise and support the vehicle appropriately.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    How should the O-ring seal be prepared for installation for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Place the O-ring seal onto the VSS and coat it with a thin film of transmission fluid.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the torque specification for installing the front speed sensor for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Install the front speed sensor and tighten it to 15 Nm (11 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What should be ensured during the installation of the front speed sensor for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    Ensure to follow the fastener notice in service precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the next step after disconnecting the electrical connector for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Remove the input speed sensor bolt and the input speed sensor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the first step to replace the right rear transfer case speed sensor for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Raise and suitably support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What should be ensured during the installation of the new speed sensor for the 2003 Chevrolet Suburban 1500? Posted by Customer
    A:
    Follow the fastener notice in service precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the final step after installing the output speed sensor for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Reconnect the output speed sensor electrical connector and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What should be ensured when installing the new speed sensor for the 2004 Chevrolet Tahoe? Posted by Customer
    A:
    Ensure to use a NEW O-ring seal and tighten the sensor to 17 Nm (13 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the first step to replace the Input Shaft Speed Sensor for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Raise and suitably support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What should be done after raising the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Disconnect the left rear speed sensor electrical connector and remove the left rear speed sensor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What should be done after removing the transfer case shield for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Disconnect the front speed sensor electrical connector and remove the front speed sensor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Vehicle Speed Sensor 19132816 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19132816 Vehicle Speed Sensor is available in the market under the name GM Vehicle Speed Sensor. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19132816 Vehicle Speed Sensor fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 19132816 maintains top performance when functioning as the Sensor, Speedometer Drive; Speed Sensor unit. The component 19132816 is constructed from durable material and its dimensions span 2.3 x 2.3 x 2.3 inches while weighing 0.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Sensor, Speedometer Driven. The part 19132816 has available replacement options 25340482. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.