Make sure this part fits

GM 12592250
Camshaft Position Sensor

2004-2008 GM

Customer Questions & Expert Answers (15)
GM 12592250 Camshaft Position Sensor
  • Part Description
    Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Camshaft Sensor
  • Replaces
    12566847
  • Manufacturer
    General Motors
Make sure this part fits
$77.43 MSRP: $145.40
You Save: $67.97 (47%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2006 Buick LaCrosseCXS6 Cyl 3.6 L GAS
    2004-2005 Buick RendezvousCXL, CXL Plus, Ultra6 Cyl 3.6 L GAS
    2004-2006 Cadillac CTSBase6 Cyl 2.8 L GAS, 6 Cyl 3.6 L GAS
    2004-2008 Cadillac SRXBase6 Cyl 3.6 L GAS
    2005-2006 Cadillac STSBase6 Cyl 3.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12592250 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12592250 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Camshaft Position Sensor on Bank 1 (Right Side) Exhaust on Cadillac STS? Posted by Customer
    A:
    The first step to replace the Bank 1 (Right Side) Exhaust camshaft position sensor involves engine sight shield removal. Starting with the right bank exhaust camshaft position sensor , detach its electrical connector while marking the connectors when multiple sensors need removal for precise installation since all connectors have interchangeable functions. The right bank exhaust camshaft position sensor can be removed after you have taken out its retaining bolt first. During installation apply engine oil to the camshaft position sensor O-ring then check for signs of damage while making a sensor replacement if it shows wear. Use the right bank exhaust camshaft position sensor and install its retaining bolt while tightening it to 10 N.m (89 lb in). After reconnecting the sensor electrical connector you should operate the engine to verify no leaks exist near the sensor before installing the engine sight shield.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after turning the ignition OFF for the 2006 Buick LaCrosse? Posted by Customer
    A:
    Remove the power steering fluid reservoir bolts and reposition the power steering fluid reservoir to gain access, ensuring not to disconnect the power steering fluid lines/hoses from the reservoir.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft Position Sensor
    Q:
    What should be done after disconnecting the electrical connector for the 2005 Buick LaCrosse? Posted by Customer
    A:
    Remove the CMP sensor bolt and the CMP sensor itself.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft Position Sensor
    Q:
    What is the first step to replace the Camshaft Position (CMP) Sensor for the 2005 Buick Rendezvous? Posted by Customer
    A:
    Turn OFF the ignition and remove the power steering pump.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft Position Sensor
    Q:
    How do you install the new CMP sensor for the 2005 Cadillac CTS? Posted by Customer
    A:
    Place the CMP sensor back in position and secure it with the CMP sensor bolt, tightening it to 10 N.m (89 lb in) as per Fastener Notice in Service Precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft Position Sensor
    Q:
    What is the next step after removing the KS pigtail retaining clip for the 2004 Cadillac CTS? Posted by Customer
    A:
    Take out the bolt securing the CMP sensor to the camshaft bearing cap and remove the CMP sensor from the camshaft bearing cap.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft Position Sensor
    Q:
    How should you prepare the O-ring before installation for the 2007 Cadillac SRX? Posted by Customer
    A:
    Lubricate the O-ring with engine oil.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft Position Sensor
    Q:
    What is the first step to replace the Camshaft Position Sensor on Bank 2 (Left Side) Exhaust for the 2008 Cadillac SRX? Posted by Customer
    A:
    Turn the ignition OFF and avoid disconnecting the power steering fluid lines/hoses from the reservoir.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft Position Sensor
    Q:
    What should be done after installing the CMP sensor for the 2005 Cadillac SRX? Posted by Customer
    A:
    Reconnect the CMP sensor electrical connector and reinstall the power steering fluid reservoir.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft Position Sensor
    Q:
    How should the CMP sensor be secured during installation for the 2004 Cadillac SRX? Posted by Customer
    A:
    Secure the CMP sensor with the bolt, tightening it to 10 N.m (89 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft Position Sensor
    Q:
    How do you disconnect the camshaft position sensor for the 2007 Cadillac SRX? Posted by Customer
    A:
    Disconnect the electrical connector from the right bank exhaust camshaft position sensor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft Position Sensor
    Q:
    How do you install the new CMP sensor for the 2006 Cadillac SRX? Posted by Customer
    A:
    Place the CMP sensor back in position and secure it with the CMP sensor bolt, tightening it to 10 N.m (89 lb in) as per Fastener Notice in Service Precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft Position Sensor
    Q:
    How should the new camshaft position sensor be installed for the 2006 Cadillac STS? Posted by Customer
    A:
    Install the right bank intake camshaft position sensor along with the retaining bolt, tightening it to 10 N.m (89 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft Position Sensor
    Q:
    How should the camshaft sensor O-ring be prepared for installation for the 2005 Cadillac STS? Posted by Customer
    A:
    Lubricate the camshaft sensor O-ring with engine oil and inspect it for wear or damage, replacing it if necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft Position Sensor
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Camshaft Position Sensor 12592250 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12592250 Camshaft Position Sensor is available in the market under the name GM Camshaft Position Sensor. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12592250 Camshaft Position Sensor fits certain Cadillac CTS, SRX, STS models, as well as Buick LaCrosse, Rendezvous models.
The original GM component designated by manufacturer part number 12592250 maintains top performance when functioning as the Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Camshaft Sensor unit. The component 12592250 is constructed from durable material and its dimensions span 4.5 x 4.2 x 2.1 inches while weighing 0.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 12592250 has available replacement options 12566847. Each vehicle needs 4 units of the part marked as SKU 12592250. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.