Make sure this part fits

GM 19116642
Front Driver Speaker

2003-2007 GM

Customer Questions & Expert Answers (23)
GM 19116642 Front Driver Speaker
GM 19116642 Front Driver Speaker
  • Part Description
    Speaker, Radio Auxiliary Speakers
  • Position
    Front
  • Replaces
    15183362
  • Manufacturer
    General Motors
Make sure this part fits
$38.52 MSRP: $75.41
You Save: $36.89 (49%)
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2003-2007 Chevrolet Silverado 1500Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    2003-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 6.0 L GAS
    2003-2007 Chevrolet Silverado 2500 HDBase, LS, LT, LTZ, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007 Chevrolet Silverado 2500 HD ClassicLS, LT, WT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2003-2006 Chevrolet Silverado 3500Base, LS, LT, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19116642 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19116642 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the front floor console subwoofer speaker for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Remove the 2 front seats and slightly move the center console rearward to disconnect the wire connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the first step to replace the rear door speaker in an extended cab for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    Remove the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the first step for installation after removing the old speaker for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Position the speaker mounting bracket and, if it was removed, install the bolts to secure it to the door, tightening them to 6 N.m (53 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    How do you remove the subwoofer speaker for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Remove the 4 retaining bolts from the speaker and disconnect the wire connector before taking the speaker out of the subwoofer assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the first step to replace the rear side door speaker in a Crew Cab for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Begin by removing the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What should you do after removing the trim panel for the 2006 Chevrolet Silverado 1500? Posted by Customer
    A:
    Push down on the top retainer to remove the speaker and disconnect the electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What should be done after removing the garnish molding for the 2004 Chevrolet Tahoe? Posted by Customer
    A:
    Take out the speaker and disconnect the electrical connectors as necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the final step after securing the speaker for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    Reinstall the door trim panel and verify the component's operation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What should you do after removing the trim panel for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Push down on the top retainer to detach the speaker.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the next step after disconnecting the electrical connector for the 2004 Chevrolet Tahoe? Posted by Customer
    A:
    Remove the speaker from the mounting bracket and, if necessary, take out the bolts that hold the speaker mounting bracket to the door before removing the bracket itself.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    How do you remove the subwoofer speaker for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    Remove the 4 retaining bolts from the speaker and disconnect the wire connector before taking the speaker out of the subwoofer assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the final step after installing the speaker for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Reinstall the trim panel and inspect the component's operation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the final step in the replacement process for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Reinstall the windshield garnish molding.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    How do you ensure the speaker is properly installed for the 2004 GMC Yukon? Posted by Customer
    A:
    Push the speaker into place, ensuring it is completely seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the first step to replace the rear pillar speaker for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    First, remove the trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the first step to replace the Radio Front Side Door Speaker for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Begin by removing the trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    How many times should the garnish molding be reinstalled for the 2005 GMC Yukon? Posted by Customer
    A:
    Ensure to do this twice.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    How do you secure the speaker for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Secure the speaker with the screws, tightening them to 2 N.m (53 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    How do you access the subwoofer speaker for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Move the console further back to access the subwoofer speaker and remove the 4 retaining bolts (W705202S).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the first step to replace the windshield pillar speaker for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Remove the windshield garnish molding.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the final step in the installation process for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Install the windshield garnish molding.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What should you do after connecting the electrical connector for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Snap the speaker into place.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Front Driver Speaker 19116642 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19116642 Front Driver Speaker is available in the market under the name GM Car Speakers. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19116642 Front Driver Speaker fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV models.
The original GM component designated by manufacturer part number 19116642 maintains top performance when functioning as the Speaker, Radio Auxiliary Speakers unit at its Front. The component 19116642 is constructed from durable material and its dimensions span 9.5 x 3.0 x 10.3 inches while weighing 1.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Speaker. The part 19116642 has available replacement options 15183362. Each vehicle needs 2 units of the part marked as SKU 19116642. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.