Make sure this part fits

GM 19152824
Back-Up Switch

2003-2007 GM

Customer Questions & Expert Answers (12)
GM 19152824 Back-Up Switch
GM 19152824 Back-Up Switch
  • Part Description
    Switch, Back Up Lamp; Back Up Light Switch
  • Replaces
    88996556
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    2003-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 6.0 L GAS
    2003-2006 Chevrolet Silverado 2500 HDBase, LS, LT, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007 Chevrolet Silverado 2500 HD ClassicLS, LT, WT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2003-2006 Chevrolet Silverado 3500Base, LS, LT, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007 Chevrolet Silverado 3500 ClassicLS, LT, WT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2003-2006 Chevrolet Suburban 2500LS, LT8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
    2003-2004 GMC Sierra 2500Base, SLE, SLT, WT8 Cyl 6.0 L GAS
    2003-2006 GMC Sierra 2500 HDBase, SL, SLE, SLT, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007 GMC Sierra 2500 HD ClassicSL, SLE, SLT, WT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19152824 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19152824 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What tool is used to align the PNP switch during installation for the 2006 Chevrolet Avalanche 2500? Posted by Customer
    A:
    The J 41364-A Park Neutral Switch Aligner.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Neutral Safety Switch
    Q:
    What is the next step after reinstalling the control lever for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Install the range selector cable end to the range selector lever ball stud and connect the PNP switch electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Neutral Safety Switch
    Q:
    What should be done for the 8.1L engine after installing the new switch for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Reconnect the backup lamp switch electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Back Up Light Switch
    Q:
    What is the final step after installing the new switch for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Reconnect the backup lamp switch electrical connector and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Back Up Light Switch
    Q:
    What should be noted when installing the new backup lamp switch for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    The new backup lamp switch has pre-applied thread sealant on the threads.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Back Up Light Switch
    Q:
    What should be done if it is equipped with 4-wheel drive (4WD) for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Remove the front propeller shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Neutral Safety Switch
    Q:
    What should be done after removing the aligner for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Reinstall the control lever to the manual shaft with the nut, tightening it to 25 Nm (18 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Neutral Safety Switch
    Q:
    What should be noted when installing the new backup lamp switch for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    The new backup lamp switch has pre-applied thread sealant on the threads.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Back Up Light Switch
    Q:
    What is the torque specification for tightening the new backup lamp switch for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Tighten the switch to 37 Nm (27 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Back Up Light Switch
    Q:
    How do you ensure proper alignment with the Park Neutral Switch Aligner for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Rotate the tool until the upper locator pin aligns with the slot on the top of the switch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Neutral Safety Switch
    Q:
    What should be ensured when installing the new switch for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Ensure to tighten it to 20 Nm (15 ft. lbs.) as per the fastener notice.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Back Up Light Switch
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Back-Up Switch 19152824 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19152824 Back-Up Switch is available in the market under the name GM Automatic Transmission Shift Position Sensor Switch, Back Up Light Switch, Neutral Safety Switch. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19152824 Back-Up Switch fits certain Chevrolet Silverado 2500 HD, Silverado 2500, Silverado 3500 models, as well as GMC Sierra 2500 HD, Sierra 2500, Sierra 3500 models.
The original GM component designated by manufacturer part number 19152824 maintains top performance when functioning as the Switch, Back Up Lamp; Back Up Light Switch unit. The component 19152824 is constructed from durable material and its dimensions span 2.0 x 2.1 x 1.1 inches while weighing 0.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Switch, Safety Starting Switch Or Speed Sensing. The part 19152824 has available replacement options 88996556. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.