Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 15077858
Lock Switch

2003-2007 GM

Customer Questions & Expert Answers (15)
GM 15077858 Lock Switch
GM 15077858 Lock Switch
GM 15077858 Lock Switch
GM 15077858 Lock Switch
  • Part Description
    Switch, Door And End Gate Electrical; Door Lock Switch
  • Manufacturer
    General Motors
Make sure this part fits
$20.39 MSRP: $31.70
You Save: $11.31 (36%)
1
ADD TO CART
  • 2006 Chevy Silverado 1500 Lock Switch Diagram for 15077858
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 15077858

  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2003-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    2003-2007 Chevrolet Silverado 1500Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    2003-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 15077858 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15077858 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the passenger side door lock switch and power window switch on Chevrolet Avalanche 2500? Posted by Customer
    A:
    Initiating the replacement of the power Door Lock Switch for the passenger side requires starting with the front door trim panel removal. A screw holding the switch panel bezel to the front door trim panel must first be removed before gently using a flat-bladed tool to detach the switch panel bezel from the door panel. The retention of the door module is achieved through clip release by using a wide plastic flat-bladed tool at both sides of the door module before pulling it free from the switch panel bezel. The door module installation process starts with fitting it into the switch panel bezel until the correct click position is reached followed by restoring the switch panel bezel with its module back into the door trim panel. A screw needs installation to attach the front door trim panel to the switch panel bezel by tightening it to 2 n.m (18 lb in). Reinstall the front door trim panel after you complete programming procedures that are required for the door control module.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the passenger side door lock switch and power window switch on Chevrolet Avalanche 1500? Posted by Customer
    A:
    Initiating the replacement of the power Door Lock Switch for the passenger side requires starting with the front door trim panel removal. A screw holding the switch panel bezel to the front door trim panel must first be removed before gently using a flat-bladed tool to detach the switch panel bezel from the door panel. The retention of the door module is achieved through clip release by using a wide plastic flat-bladed tool at both sides of the door module before pulling it free from the switch panel bezel. The door module installation process starts with fitting it into the switch panel bezel until the correct click position is reached followed by restoring the switch panel bezel with its module back into the door trim panel. A screw needs installation to attach the front door trim panel to the switch panel bezel by tightening it to 2 n.m (18 lb in). Reinstall the front door trim panel after you complete programming procedures that are required for the door control module.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the door lock switch and power window switch on the passenger side on Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    The first step to swap the passenger-side Door Lock and window switch involves removing the front door trim panel followed by removing one screw which holds the switch panel bezel to the front door trim panel. Finish by detaching the switch panel bezel from the door panel using a flat-bladed tool. The switch panel bezel removal begins with unscrewing the fixation screw between the front door trim panel and switch panel bezel. After screw removal, detach the switch panel bezel from the door panel using a flat-bladed tool. A wide plastic flat-bladed tool should be used to release retaining clips located on each side of the door module which enables door module removal from the switch panel bezel. Insert the door module into the switch panel bezel while it clicks into position before restoring the switch panel bezel together with the module back to the door trim panel. Install the screw that maintains the switch panel bezel to the front door trim panel making it tight at 2 n.m (18 lb in). Proceed with the front door trim panel replacement before executing setup and programming procedures according to guidelines found for these tasks.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the door lock switch and power window switch on the passenger side on GMC Sierra 1500 Classic? Posted by Customer
    A:
    The first step to swap the passenger-side Door Lock and window switch involves removing the front door trim panel followed by removing one screw which holds the switch panel bezel to the front door trim panel. Finish by detaching the switch panel bezel from the door panel using a flat-bladed tool. The switch panel bezel removal begins with unscrewing the fixation screw between the front door trim panel and switch panel bezel. After screw removal, detach the switch panel bezel from the door panel using a flat-bladed tool. A wide plastic flat-bladed tool should be used to release retaining clips located on each side of the door module which enables door module removal from the switch panel bezel. Insert the door module into the switch panel bezel while it clicks into position before restoring the switch panel bezel together with the module back to the door trim panel. Install the screw that maintains the switch panel bezel to the front door trim panel making it tight at 2 n.m (18 lb in). Proceed with the front door trim panel replacement before executing setup and programming procedures according to guidelines found for these tasks.
    Posted by ChevyPartsGiant Specialist
    Q:
    What systems need to be programmed after the installation for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Program the Tire Pressure Monitoring system and the Keyless Entry system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Switch
    Q:
    What tool is recommended to release the retaining clips on the door module for the 2006 Cadillac Escalade EXT? Posted by Customer
    A:
    Utilize a wide plastic flat-bladed tool.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Switch
    Q:
    What is the first step to replace the power door lock switch for the passenger side for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Begin by removing the front door trim panel and disconnecting the electrical connectors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Switch
    Q:
    What additional step is required if equipped with camper mirrors for the 2006 Chevrolet Silverado 1500? Posted by Customer
    A:
    Program the door module using the Service Programming System (SPS).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Switch
    Q:
    What is the first step to replace the door lock and side window switch on the passenger side for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Begin by removing the front door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Switch
    Q:
    What should be done after removing the door trim panel for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Remove the screw that retains the switch panel bezel from the front door panel and carefully detach the bezel using a flat-bladed tool.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Switch
    Q:
    What is the installation process for the door module for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Insert the door module into the switch panel bezel until it snaps into place, then attach the bezel and module to the door panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Switch
    Q:
    What should be done after securing the switch panel bezel for the 2006 GMC Sierra 3500? Posted by Customer
    A:
    Reconnect the electrical connectors and reinstall the front door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Switch
    Q:
    What is the final step after reinstalling the front door trim panel for the 2006 GMC Yukon? Posted by Customer
    A:
    If equipped with camper mirrors, program the door module using the Service Programming System (SPS).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Switch
    Q:
    How do you secure the switch panel bezel to the front door trim panel for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Secure the switch panel bezel to the front door trim panel with a screw, tightening it to 2 N.m (18 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Switch
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Lock Switch 15077858 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15077858 Lock Switch is available in the market under the name GM Door Lock Switch. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15077858 Lock Switch fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 15077858 maintains top performance when functioning as the Switch, Door And End Gate Electrical; Door Lock Switch unit. The component 15077858 is constructed from durable material and its dimensions span 3.3 x 2.1 x 1.4 inches while weighing 0.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 15077858 has available replacement options. Each vehicle needs 2 units of the part marked as SKU 15077858. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.