Make sure this part fits

GM 15055218
Weatherstrip, Rear

2000-2004 GM

Customer Questions & Expert Answers (17)
GM 15055218 Weatherstrip, Rear
  • Part Description
    Weatherstrip, Rear Door Opening
  • Position
    Rear
  • Replaces
    15760323
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2003 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2004 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2000-2004 Chevrolet Suburban 1500Base, LS, LT, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2000-2004 Chevrolet Suburban 2500Base, LS, LT8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
    2000-2003 Chevrolet TahoeBase, LS, LT, Z718 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2000-2003 GMC YukonDenali, SLE, SLT8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2000-2004 GMC Yukon XL 1500Denali, SLE, SLT8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2000-2004 GMC Yukon XL 2500SLE, SLT8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15055218 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15055218 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How should the weatherstrip be installed for the 2002 Cadillac Escalade? Posted by Customer
    A:
    Install the weatherstrip from one end, making sure the corners are fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What needs to be done to remove the weatherstrip for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Take out the screws and pull the weatherstrip from the front of the glass run channel, the top of the window frame flange, and the rear of the glass run channel before removing it from the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What are the final steps after installing the new sealing strip for the 2002 Cadillac Escalade? Posted by Customer
    A:
    Reinstall the outside mirror and raise the window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you start removing the weatherstrip for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Begin removing the weatherstrip from one end of the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the upper weatherstrip on the mid gate for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Fold down the rear seat and remove the rear removable glass panel, followed by the midgate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the new weatherstrip on the liftgate for the 2002 Chevrolet Tahoe? Posted by Customer
    A:
    Align the paint mark on the weatherstrip to the outer top center of the pinch weld flange, then push the weatherstrip onto the flange starting from the top center of the endgate opening, ensuring it is completely seated around the liftgate opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after pulling the roof drip molding for the 2000 Chevrolet Suburban 1500? Posted by Customer
    A:
    Push the roof drip molding over the pinchweld.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the weatherstrip on the rear side door opening for the 2001 Chevrolet Suburban 1500? Posted by Customer
    A:
    First, open both doors and remove the sill plate, hinge pillar trim pillar, and windshield pillar molding.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    Where should the new weatherstrip be placed during installation for the 2000 Chevrolet Suburban 1500? Posted by Customer
    A:
    Place the new weatherstrip in the same locations: the front of the glass run channel, the top of the window frame flange, and the rear of the glass run channel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you begin the installation of the new weatherstrip for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Insert the groove of the weatherstrip into the endgate opening flange from either side.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    Why is it important to apply the new weatherstrip in a clean environment for the 2003 Chevrolet Suburban 1500? Posted by Customer
    A:
    A clean environment is important to prevent dust or dirt from interfering with the adhesive backing, as foreign material may cause improper adhesion.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you ensure during the installation of the weatherstrip for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Ensure the weatherstrip is completely seated around the liftgate opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the new weatherstrip for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Fully seat the new weatherstrip into the channel of the rear side door opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the front door weatherstrip for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Open the door and remove the sill plate, hinge pillar trim panel, and windshield pillar molding.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What are the final steps after installing the weatherstrip for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Reinstall the window, the water deflector, and the door trim panel, and finally, inspect the operation of the window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the rear door weatherstrip for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Open the rear door and remove the rear door sill plate, center pillar molding, and third pillar trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Weatherstrip, Rear 15055218 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15055218 Weatherstrip, Rear is available in the market under the name GM Weather Strip. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15055218 Weatherstrip, Rear fits certain Chevrolet Tahoe, Suburban 1500, Suburban 2500 models, as well as GMC Yukon, Yukon XL 1500, Yukon XL 2500. Additionally, it is compatible with Cadillac Escalade, Escalade ESV models.
The original GM component designated by manufacturer part number 15055218 maintains top performance when functioning as the Weatherstrip, Rear Door Opening unit at its Rear. The component 15055218 is constructed from durable material and its dimensions span 23.2 x 4.0 x 1.4 inches while weighing 2.90 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 15055218 has available replacement options 15760323. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.