Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 25867744
Drip Weatherstrip, Front Passenger Side

1996-2024 GM

Customer Questions & Expert Answers (55)
GM 25867744 Drip Weatherstrip, Front Passenger Side
  • Part Description
    Weatherstrip, Front Side Door
  • Position
    Front Passenger Side
  • Replaces
    15959078
  • Manufacturer
    General Motors
Make sure this part fits
$115.03 MSRP: $171.98
You Save: $56.95 (34%)
1
ADD TO CART

  • 25867744 Drip Weatherstrip, Front Passenger Side is Ref No. 5 in the diagram below

    1999 GMC Savana 2500 Drip Weatherstrip, Front Passenger Side Diagram for 25867744
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 25867744

  • Vehicle Fitment

    Year Make Model Trim Engine
    1996-2014 Chevrolet Express 1500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS
    1996-2024 Chevrolet Express 2500Base, LS, LT4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
    1996-2024 Chevrolet Express 3500Base, LS, LT4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
    1996-1999 Chevrolet P30Base6 Cyl 4.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1996-2014 GMC Savana 1500Base, LS, LT, SLE, SLT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS
    1996-2024 GMC Savana 2500Base, LS, LT, SLE, SLT4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
    1996-2024 GMC Savana 3500Base, LS, LT, SLE, SLT4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25867744 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25867744 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How should the new cargo door seal be installed for the 2006 Chevrolet Express 2500? Posted by Customer
    A:
    Guide the seal through the opening between the body and the hinges, then install it starting at the top center of the liftgate opening, positioning the liftgate seal to the pinch-weld flange and working down the right and left sides towards the bottom center.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after aligning the pins for the 2006 Chevrolet Express 1500? Posted by Customer
    A:
    Insert the pocket over the door flange and push down the pins until fully seated, ensuring there are no gaps between the door and the weatherstrip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done for clearance around body structure reinforcements for the 2004 Chevrolet Express 1500? Posted by Customer
    A:
    Cut slots as necessary for clearance around body structure reinforcements.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Seal
    Q:
    What should be applied to the new weatherstrip before installation for the 2011 Chevrolet Express 1500? Posted by Customer
    A:
    Apply GM P/N 12345097 (Canadian P/N 10953479) or an equivalent into the channel on the new weatherstrip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is crucial to confirm during the installation for the 2007 Chevrolet Express 2500? Posted by Customer
    A:
    It is crucial to confirm that the corners do not pull away from the body during installation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What are the final steps after pressing the weatherstrip into place for the 2005 Chevrolet Express 2500? Posted by Customer
    A:
    Install the retainers at the ends, and reattach the hinge pillar upper garnish, hinge pillar lower garnish molding, passenger side front corner garnish molding, passenger side body side trim panel, and the side door stepwell mat.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after removing the old weatherstrip for the 2004 Chevrolet Express 1500? Posted by Customer
    A:
    Install the new side rear door lower weatherstrip onto the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step after installing the new weatherstrip for the 2002 Chevrolet Express 2500? Posted by Customer
    A:
    Reinstall the front door stepwell mat, the front door lower pillar garnish molding, the front door upper pillar garnish molding, the windshield garnish molding, the hinge pillar trim panel, and finally the front door opening upper frame garnish molding.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you remove the rear door opening weatherstrip for the 2009 Chevrolet Express 2500? Posted by Customer
    A:
    Pull the rear door opening weatherstrip from the door opening pinch-weld flange, using 3M Release Agent or an equivalent if necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How can you ensure full engagement of the seal to the flange for the 2003 Chevrolet Express 3500? Posted by Customer
    A:
    Use a rubber mallet to ensure full engagement of the seal to the flange, ensuring it is not kinked at the corners of the door openings.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Seal
    Q:
    What is the next step after removing the old weatherstrip for the 2004 Chevrolet Express 3500? Posted by Customer
    A:
    Install the new weatherstrip onto the sliding side door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you remove the old door opening weatherstrip for the 2009 Chevrolet Express 2500? Posted by Customer
    A:
    Gently pull the door opening weatherstrip from the door opening pinch-weld flange and remove it from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the new weatherstrip for the 2006 Chevrolet Express 3500? Posted by Customer
    A:
    Position the weatherstrip onto the pillar and press the retainers in the weatherstrip into the holes in the door pillar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be sprayed inside the sealing strip for installation for the 2001 Chevrolet Express 3500? Posted by Customer
    A:
    A water and soap solution per GM P/N 9985662, or equivalent.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the sealing strip on the front door upper for the 2003 Chevrolet Express 3500? Posted by Customer
    A:
    Position the weatherstrip onto the pillar and press the retainers in the weatherstrip into the holes in the door pillar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the new weatherstrip for the 2011 Chevrolet Express 3500? Posted by Customer
    A:
    Place the weatherstrip into the roof rail, then press the retainers into the weatherstrip and into the holes in the roof rail.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step after installing the seal for the 2005 Chevrolet Express 2500? Posted by Customer
    A:
    Close the cargo door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Seal
    Q:
    What is the next step after securing the top of the weatherstrip for the 2011 Chevrolet Express 2500? Posted by Customer
    A:
    Install the retainer at the top of the weatherstrip to the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the rear hood seal for the 2000 Chevrolet Express 3500? Posted by Customer
    A:
    Align the slot in the rear hood seal with the cowl pinch weld flange and press the rear hood seal into place.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the front door opening weatherstrip for the 2010 Chevrolet Express 2500? Posted by Customer
    A:
    Remove the hinge pillar trim panel, the front door upper pillar garnish molding, the front door lower pillar garnish molding, and the front door stepwell mat.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you secure the weatherstrip during installation for the 2005 Chevrolet Express 3500? Posted by Customer
    A:
    Press the retainers into the weatherstrip and into the holes in the roof rail.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the front door opening weatherstrip for the 2000 Chevrolet Express 3500? Posted by Customer
    A:
    Remove the front door opening upper frame garnish molding, the hinge pillar trim panel, the windshield garnish molding, the front door upper pillar garnish molding, the front door lower pillar garnish molding, and the front door stepwell mat.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the side door opening weatherstrip for the 2004 Chevrolet Express 1500? Posted by Customer
    A:
    Remove the hinge pillar upper garnish, hinge pillar lower garnish molding, passenger side front corner garnish molding, passenger side body side trim panel, and the side door stepwell mat.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after installing the weatherstrip for the 2009 Chevrolet Express 3500? Posted by Customer
    A:
    Reinstall the body side window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the new weatherstrip be installed for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    Install the weatherstrip by starting at the corners to align it with the door opening pinch-weld flange, ensuring it does not pull away at the corners while pressing it onto the flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after removing the retainers for the 2008 Chevrolet Express 3500? Posted by Customer
    A:
    Install the new weatherstrip onto the sliding side door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the preparation step for installation for the 2009 GMC Savana 2500? Posted by Customer
    A:
    Peel off the liner from the saturated foam and spray an 85 percent alcohol and 15 percent water mixture per GM 9981293 onto the saturated foam patch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the new seal be installed for the 2004 GMC Savana 1500? Posted by Customer
    A:
    Guide the seal through the opening between the body and the hinges, then install it starting at the top center of the liftgate opening, positioning it against the pinch-weld flange and working down both sides towards the bottom center.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Seal
    Q:
    How do you secure the new weatherstrip in place for the 2001 GMC Savana 3500? Posted by Customer
    A:
    Press the retainers in the left rear door weatherstrip into the holes in the left rear door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step in the installation process for the 2005 GMC Savana 2500? Posted by Customer
    A:
    Press the retainers into the holes in the door until they are fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you prepare the new side door opening weatherstrip for installation for the 2002 GMC Savana 3500? Posted by Customer
    A:
    Apply weatherstrip adhesive into the channel on the new side door opening weatherstrip using GM P/N 12345097, Canadian P/N 10953479, or an equivalent.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the weatherstrip be aligned during installation for the 2004 GMC Savana 1500? Posted by Customer
    A:
    Start at the corners, aligning the weatherstrip with the door opening pinch-weld flange, ensuring the corners remain in place.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the sliding door window weatherstrip for the 2009 GMC Savana 1500? Posted by Customer
    A:
    Remove the sliding side door upper trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after removing the weatherstrip for the 2010 GMC Savana 1500? Posted by Customer
    A:
    Remove the weatherstrip retainers from the holes in the sliding side door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the rear door weatherstrip for the 2003 GMC Savana 3500? Posted by Customer
    A:
    Begin by removing the rear corner garnish molding, the driver side body side rear trim panel, the passenger side rear corner trim panel, the rear floor trim plate, and the rear door opening frame garnish molding.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the front door weatherstrip for the 2004 GMC Savana 1500? Posted by Customer
    A:
    Remove the hinge pillar trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the side front door weatherstrip for the 2003 GMC Savana 2500? Posted by Customer
    A:
    First, remove the retainer at the top of the weatherstrip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the new weatherstrip for the 2011 GMC Savana 1500? Posted by Customer
    A:
    Position the weatherstrip onto the pillar and press the retainers in the weatherstrip into the holes in the door pillar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the rear hood seal for the 2010 GMC Savana 2500? Posted by Customer
    A:
    Align the slot in the rear hood seal with the cowl pinch-weld flange and press the rear hood seal into place.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after removing the weatherstrip for the 2002 GMC Savana 3500? Posted by Customer
    A:
    Clean the door thoroughly to eliminate any old adhesive.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What do you do once the window is removed for the 2009 GMC Savana 3500? Posted by Customer
    A:
    Pull the side door window weatherstrip from the window opening pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be applied to the new weatherstrip for installation for the 2006 GMC Savana 3500? Posted by Customer
    A:
    Apply GM P/N 12345097 (Canadian P/N 10953479) or an equivalent into the channel on the new weatherstrip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be ensured during the installation of the new weatherstrip for the 2009 GMC Savana 2500? Posted by Customer
    A:
    Ensure the corners are properly aligned with the body during installation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after removing the old weatherstrip for the 2011 GMC Savana 3500? Posted by Customer
    A:
    Install the new weatherstrip onto the sliding side door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the left rear door upper weatherstrip for the 2006 GMC Savana 2500? Posted by Customer
    A:
    Use 3M(R) General Purpose Adhesive Cleaner (3M P/N 08987) or an equivalent to remove the existing weatherstrip from the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the cargo door seal for the 2003 GMC Savana 3500? Posted by Customer
    A:
    Open the cargo door and pull the seal from the cargo door opening pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Seal
    Q:
    How can you ensure full engagement of the seal to the flange for the 2003 GMC Savana 2500? Posted by Customer
    A:
    Use a rubber mallet to ensure full engagement of the seal to the flange, ensuring it is not kinked at the corners of the door openings.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Seal
    Q:
    How do you remove the sliding side door window weatherstrip for the 2004 GMC Savana 3500? Posted by Customer
    A:
    Pull the sliding side door window weatherstrip from the window opening pinch-weld flange and remove it from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you replace the front or rear side door lower weatherstrip for the 2011 GMC Savana 2500? Posted by Customer
    A:
    First, remove the weatherstrip from the door, followed by the weatherstrip retainers from the holes in the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the new weatherstrip for the 2007 GMC Savana 3500? Posted by Customer
    A:
    Position the weatherstrip onto the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the side front door weatherstrip for the 2001 GMC Savana 2500? Posted by Customer
    A:
    First, remove the retainer at the top of the weatherstrip and detach it from the top of the door using 3M Release Agent or an equivalent.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be removed after the hinge pillar trim panel for the 2005 GMC Savana 3500? Posted by Customer
    A:
    The front door upper and lower pillar garnish moldings.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after removing the weatherstrip for the 2000 GMC Savana 3500? Posted by Customer
    A:
    Clean the door thoroughly to remove any old adhesive.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the weatherstrip for the 2001 GMC Savana 1500? Posted by Customer
    A:
    Place the weatherstrip onto the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Drip Weatherstrip, Front Passenger Side 25867744 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25867744 Drip Weatherstrip, Front Passenger Side is available in the market under the name GM Weather Strip, Door Seal. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25867744 Drip Weatherstrip, Front Passenger Side fits certain Chevrolet Express 1500, Express 2500, Express 3500 models, as well as GMC Savana 2500, Savana 3500, Savana 1500 models.
The original GM component designated by manufacturer part number 25867744 maintains top performance when functioning as the Weatherstrip, Front Side Door unit at its Front Passenger Side. The component 25867744 is constructed from durable material and its dimensions span 2.3 x 15.3 x 14.7 inches while weighing 0.60 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Weatherstrip, Side Door Opening. The part 25867744 has available replacement options 15959078. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.