OEM 2001 Cadillac Eldorado Antenna Cable

2001 Cadillac Eldorado Antenna Cable Parts Questions & Experts Answers

• Q: How to replace the antenna cable on 2001 Cadillac Eldorado?

  A: Start coaxial cable replacement by first removing the radio and heater/ac control assembly followed by dismantling of the Center Console and the right side insulator panel. Before proceeding inspect the body electrical harness routing in the instrument panel and disconnect the body electrical harness from israel retainer before taking out the Antenna Cable. To get to the body electrical harness on the floor you must first remove the right side carpet retainer and pull back the carpet from its position. To begin installation start by opening the right-side body electrical harness retainer of the vehicle while removing the Antenna Cable from the harness. Remove the conduit components first by taking away both the body electrical harness and rear seat back and the Antenna Cable from the harness. Step by step guide to feed the Antenna Cable into the rear area while disconnecting it from the power Antenna before removing it from the rear compartment electrical harness. Installation begins with connecting the Antenna Cable to the vehicle and moving it through the rear compartment to the passenger area before connecting it to the power Antenna. Use electrical tape to secure the Antenna Cable to the body wiring harness before installing both components to the conduit inside the passenger compartment and to the body electrical harness and securing with tape when needed. Connect the body electrical harness/Antenna Cable to the wiring retainer on the right side of the vehicle while also connecting the Antenna Cable to the wiring harness on the floor through new electrical tape application as necessary. To finish the repair you should reinstall the right side carpet and the right side carpet retainer then connect the Antenna Cable to the instrument panel electrical harness before securing it with new electrical tape and finishing the repair by installing the electrical harness to the instrument panel and fastening the electrical harness retainer before reinstalling the right side insulator panel Center Console and radio and heater/ac control assembly.