ChevyParts
My Garage
My Account
Cart
OEM 2004 Buick LeSabre Brake Line
Brake Hose- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 Brake Lines found
Product Specifications- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Passenger Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 24.0 x 6.3 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25764283
- Warranty: This genuine part is guaranteed by GM's factory warranty.
- Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Front Driver Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 25.2 x 6.3 x 3.1 inches
- Condition: New
- SKU: 25764282
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear
- Replaces: 17999820, 22163668, 22113390
- Item Weight: 11.20 Pounds
- Item Dimensions: 0.2 x 4.4 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366759
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Front Flex Hose; Hose, Hydraulic Brake
- Position: Front Passenger Side
- Replaces: 22163448, 17999966, 22163886
- Item Weight: 0.80 Pounds
- Item Dimensions: 19.5 x 4.2 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366761
- Warranty: This genuine part is guaranteed by GM's factory warranty.
- Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Front Flex Hose; Hose, Hydraulic Brake
- Position: Front Driver Side
- Replaces: 22163885, 22163447, 17999817
- Item Weight: 0.70 Pounds
- Item Dimensions: 6.3 x 3.1 x 12.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366760
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2004 Buick LeSabre Brake Line
With a comprehensive array of OEM 2004 Buick LeSabre Brake Line, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Buick LeSabre Brake Line are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2004 Buick LeSabre Parts Questions & Experts Answers
- Q: How to replace the brake line using the J 29803-A ISO Flaring Kit on 2004 Buick LeSabre?A: To change the brake pipe use J 29803-A ISO Flaring Kit (J 29803-A) and to always use double-wall steel brake pipe to avoid the brake system failure. Start with the right pipe and steel fitting nut depending on the size of the pipe as it dictates the size of the outside diameter. Cutt the pipe square and to the right length with a hacksaw, then measure the old pipe with a string on it, adding pull for each ISO flare 3.2mm zerin (.125 in). Install the fittings before flaring, chamfer the inside and outside diameters of the pipe using a de-burring tool, as well as removing any lubricant from the brake pipe and the J 29803-A, securing the J 29803-A into a vise, determining the proper collet and forming mandrel for pipe size, and inserting the mandrel into J 29803-A while keeping in place. Thread the forcing screw so that it reaches the mandrel and turn it backward by one full turn. Slide the clamping nut over the brake pipe, and insert the prepared pipe into the collet with the end to leave about 19 mm (0.750 in), and at the same time ensuring the end of the pipe contacts the mandrel face. To prevent the pipe from being pushed out, please make sure to tighten the clamping nut properly, but do not over work the forcing screw (make sure not to make an oversized flare). Tighten the forcing screw tighter until it bottoms then back off clamping nut and disassemble the collet. Measure the flare diameter which should be as between 6.92mm(0.272 in) 7.28mm(0.286 in) and used tube bender to shape the new pipe to fit the old one maintaining a clearance at least are 19mm (0.75 in), 13mm (0.50 in) or 7mm (0.25 in) to shielded line unless clipped to a component.
Related 2004 Buick LeSabre Parts
2004 Buick LeSabre Wheel Bearing
2004 Buick LeSabre ABS Control Module
2004 Buick LeSabre Brake Backing Plate
2004 Buick LeSabre Brake Booster
2004 Buick LeSabre Brake Caliper Bracket
2004 Buick LeSabre Brake Caliper Repair Kit
2004 Buick LeSabre Brake Calipers
2004 Buick LeSabre Brake Dust Shields
2004 Buick LeSabre Brake Pad
2004 Buick LeSabre Brake Proportioning Valve
2004 Buick LeSabre Hydraulic Hose
2004 Buick LeSabre Wheel Hub Bolt