How to replace the rear brake line on 2005 Buick LeSabre?

Before working on the brake hose you must safely lift your vehicle and detach the tire and wheel. Use a clean tool to clear all materials from brake hose and pipe fittings before placing a rubber cap to seal the brake pipe end. Twist the brake pipe fitting from the brake hose and put an end plug on it for protection. Separate the brake hose from the bracket by using a flat blade tool, then pull out the brake hose from its bracket and unfasten the brake hose from the caliper while keeping the brake caliper steady. Remove the two copper brake hose gaskets since they resist detachment from the caliper or hose end. Also install a rubber plug into the brake hose to caliper bolt hole. You need to discard the rubber plug before putting on new copper brake hose gaskets when installing the brake hose system. Push the brake hose onto the caliper bolt before tightening it to 44 n.m (32 ft lb). Also make sure the hose remains straight during installation. Connect the brake hose to its bracket and retainer. To join the brake pipe fitting with the brake hose remove the rubber cap from the fitting end and tighten it to 11 lb ft or 15 n.m. Complete the hydraulic brake system bleed then put on the wheel and tires before lowering the vehicle.

OEM 2005 Buick LeSabre Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Brake Lines found

View related parts
2005 Buick LeSabre Flex Hose, Front Passenger Side
Part Number: 25764283
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Passenger Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 24.0 x 6.3 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25764283
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
2005 Buick LeSabre Flex Hose, Front Driver Side
Part Number: 25764282
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Front Driver Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 25.2 x 6.3 x 3.1 inches
- Condition: New
- SKU: 25764282
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
2005 Buick LeSabre Flex Hose, Rear
Part Number: 19366759
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear
- Replaces: 17999820, 22163668, 22113390
- Item Weight: 11.20 Pounds
- Item Dimensions: 0.2 x 4.4 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366759
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
2005 Buick LeSabre Flex Hose, Front Passenger Side
Part Number: 19366761
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Front Flex Hose; Hose, Hydraulic Brake
- Position: Front Passenger Side
- Replaces: 22163448, 17999966, 22163886
- Item Weight: 0.80 Pounds
- Item Dimensions: 19.5 x 4.2 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366761
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
2005 Buick LeSabre Flex Hose, Front Driver Side
Part Number: 19366760
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Front Flex Hose; Hose, Hydraulic Brake
- Position: Front Driver Side
- Replaces: 22163885, 22163447, 17999817
- Item Weight: 0.70 Pounds
- Item Dimensions: 6.3 x 3.1 x 12.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366760
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS

2005 Buick LeSabre Brake Line

With a comprehensive array of OEM 2005 Buick LeSabre Brake Line, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Buick LeSabre Brake Line are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Buick LeSabre Parts Questions & Experts Answers

Q: How to replace the rear brake line on 2005 Buick LeSabre?
A: Before working on the brake hose you must safely lift your vehicle and detach the tire and wheel. Use a clean tool to clear all materials from brake hose and pipe fittings before placing a rubber cap to seal the brake pipe end. Twist the brake pipe fitting from the brake hose and put an end plug on it for protection. Separate the brake hose from the bracket by using a flat blade tool, then pull out the brake hose from its bracket and unfasten the brake hose from the caliper while keeping the brake caliper steady. Remove the two copper brake hose gaskets since they resist detachment from the caliper or hose end. Also install a rubber plug into the brake hose to caliper bolt hole. You need to discard the rubber plug before putting on new copper brake hose gaskets when installing the brake hose system. Push the brake hose onto the caliper bolt before tightening it to 44 n.m (32 ft lb). Also make sure the hose remains straight during installation. Connect the brake hose to its bracket and retainer. To join the brake pipe fitting with the brake hose remove the rubber cap from the fitting end and tighten it to 11 lb ft or 15 n.m. Complete the hydraulic brake system bleed then put on the wheel and tires before lowering the vehicle.