How to replace the rear brake line (Jounce) on 2005 Chevrolet Cobalt?

Before replacing the rear brake hose Jounce start by raising and supporting the vehicle then removing the tire and wheel. Wash all foreign particles away from the brake hose ends before working on the brake pipe components. A back up wrench must disconnect the brake pipe fittings from the brake hose while you apply caps or plugs to avoid fluid waste and contamination. Take away the brake hose retention clips from the mounting brackets and slide the hose off its holders. Put the new brake hose into mounting brackets while matching its end fittings with notches. Apply hose retaining clips onto fitting ends. Using an extra wrench tool on the hose joint to connect back brake pipes at the rear brake hose and apply 19 Nm (14 ft. lbs.) torque to the hose fittings. Reassembly the wheel components while verifying that the hose stays away from suspension parts. Reinstall the tire if necessary but fix suspension problems first. Complete the braking system by draining the hydraulic fluid and putting the vehicle back to ground level.

OEM 2005 Chevrolet Cobalt Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Lines found

View related parts
2005 Chevrolet Cobalt Flex Hose, Front
Part Number: 19366692
$23.23 MSRP: $70.51
You Save: $47.28 (68%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front
- Replaces: 22716552, 15870413
- Item Weight: 1.30 Pounds
- Item Dimensions: 5.2 x 2.0 x 12.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366692
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2005 Chevrolet Cobalt Flex Hose
Part Number: 19366736
$12.99 MSRP: $31.20
You Save: $18.21 (59%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Rear Brake Front; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front and Rear
- Replaces: 22706789
- Item Weight: 0.50 Pounds
- Item Dimensions: 6.4 x 3.4 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19366736
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2005 Chevrolet Cobalt Flex Hose, Rear Driver Side
Part Number: 19366742
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Driver Side
- Replaces: 19331548, 22720042
- Item Weight: 0.60 Pounds
- Item Dimensions: 7.2 x 3.2 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366742
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2005 Chevrolet Cobalt Flex Hose, Rear Passenger Side
Part Number: 19366741
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Passenger Side
- Replaces: 22720049, 19331547
- Item Weight: 0.60 Pounds
- Item Dimensions: 6.8 x 3.2 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366741
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS

2005 Chevrolet Cobalt Brake Line

With a comprehensive array of OEM 2005 Chevrolet Cobalt Brake Line, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Cobalt Brake Line are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Cobalt Parts Questions & Experts Answers

Q: How to replace the rear brake line (Jounce) on 2005 Chevrolet Cobalt?
A: Before replacing the rear brake hose Jounce start by raising and supporting the vehicle then removing the tire and wheel. Wash all foreign particles away from the brake hose ends before working on the brake pipe components. A back up wrench must disconnect the brake pipe fittings from the brake hose while you apply caps or plugs to avoid fluid waste and contamination. Take away the brake hose retention clips from the mounting brackets and slide the hose off its holders. Put the new brake hose into mounting brackets while matching its end fittings with notches. Apply hose retaining clips onto fitting ends. Using an extra wrench tool on the hose joint to connect back brake pipes at the rear brake hose and apply 19 Nm (14 ft. lbs.) torque to the hose fittings. Reassembly the wheel components while verifying that the hose stays away from suspension parts. Reinstall the tire if necessary but fix suspension problems first. Complete the braking system by draining the hydraulic fluid and putting the vehicle back to ground level.