OEM 2006 Cadillac DTS Power Steering Reservoir

2006 Cadillac DTS Parts Questions & Experts Answers

• Q: How to replace the Power Steering Reservoir on 2006 Cadillac DTS?

  A: Start the power steering reservoir off-vehicle replacement with the Power Steering Pump Reservoir Clip Remover (part number J-42649) to eliminate the reservoir assembly retaining clips. Start by removing all bolts from the mounting bracket assembly followed by disconnection of the mounting bracket from the pump. Start by taking out the reservoir from its position inside the hydraulic pump housing then discard the O-ring seal. Inspection of the TORX® head bolts on the hydraulic pump housing should reveal tight installation before applying torque to 20 - 25 Nm (15 - 18 ft. lbs.). The valve bore plug requires tightening to 50 - 60 Nm (37 - 44 ft. lbs.) while you apply power steering fluid onto the new O-ring seal before attaching it to the reservoir. Position the reservoir mounting hole properly against the housing assembly to avoid damage and attach the reservoir assembly to the hydraulic pump housing. Frequently check the retaining clip position at the reservoir assembly before using a hammer as an assist tool. The pump requires attachment to the mounting bracket assembly while the mounting bracket bolts require torque adjustment to 28 - 38 Nm (21 - 28 ft. lbs.).