How to replace the intermediate steering column seal on 2007 Cadillac STS?

Compliance with the restraint system service precautions brings the necessary first step to replace the intermediate steering shaft seal. Start your operation by pulling the Steering Column off while keeping both it and the upper intermediate shaft connected. Remove the intermediate shaft seal from its location on the mod plate as the next step. Reinstall the new intermediate shaft seal by placing it on the mod plate for proper sealing between both components. Once done you can reinstall the Steering Column according to the required sir system settings.

OEM 2007 Cadillac STS Steering Column Seal

Steering Column to Firewall Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Steering Column Seal found

View related parts
2007 Cadillac STS Lower Cover
Part Number: 26064593
Product Specifications
- Other Name: Seal, Steering Column; Coupling Shield; Seal; Boot
- Item Weight: 1.00 Pounds
- Item Dimensions: 10.1 x 4.2 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26064593
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac STS Submodels:
- Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS

2007 Cadillac STS Steering Column Seal

With a comprehensive array of OEM 2007 Cadillac STS Steering Column Seal, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Cadillac STS Steering Column Seal are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Cadillac STS Parts Questions & Experts Answers

Q: How to replace the intermediate steering column seal on 2007 Cadillac STS?
A: Compliance with the restraint system service precautions brings the necessary first step to replace the intermediate steering shaft seal. Start your operation by pulling the Steering Column off while keeping both it and the upper intermediate shaft connected. Remove the intermediate shaft seal from its location on the mod plate as the next step. Reinstall the new intermediate shaft seal by placing it on the mod plate for proper sealing between both components. Once done you can reinstall the Steering Column according to the required sir system settings.